imo, bring it

 

SCORE!!!! I have been needing to install my 5/16 spacer that I bought from Jackus last week!!! I will just bring it with and install it there! Of course, it can be used to test with if need be as well...

This is gonna be bangin

 

^Ditto

I mean... for Rob to use of course

 

Hells yea man! Do it!

 

Ok - will bring motordynes instructions as well - you know I have to go by torque specs man... Im so excited about this..drinkin makers now..beer in the morning FTW!

 

^ Just livin the dream

 

I know there is a map in the first post, but here is an easier way to find the place.

From 114
Take 35W south to Heritage Trace Parkway exit, and make a right. Take it down til it T's (Harmon Road), and make a right. Look for the row of garages that kind of look like a storage place on the left. The shop is the in the first row (facing South), about half way down, #135. There is no sign other than numbers on the door.

From 820
Take 35W north to Heritage Trace Parkway, make a left on Heritage Trace Parkway. Take it down til it T's (Harmon Road), and make a right. Look for the row of garages that kind of look like a storage place on the left. The shop is the in the first row (facing South), about half way down, #135. There is no sign other than numbers on the door.

 

Any tools needed? I'll bring some reguardless but you may want to make a list of special tools you think you'll need.

Also I'll be rolling in the Dodge Ram. If I had an autoX this weekend I'll trailer the car for kicks but thats not going to happen on a whim.

Also, is this place dog friendly? I got a new mutt I want to get used to people.

I'll also bring some H2O, some of us got long @$$ drives to get back home an only beer isn't going to cut it.

 

I don't really see why not, but it's not my shop. The owner is a really cool guy, pretty laid back. He has two bays. One has two lifts, and the other has the dyno. It's a relatively small place, and he has a lot of stuff packed in there. Race cars, Motors on stands, tools... etc.. There is no storefront, it's all shop. No A/C, no bathrooms. There's not a parking lot per se, just a big strip of garage bays with a drive about 40ft wide in front of them. There is a grass field right there that you could let the dog chill in, and use when he has to do his thing. I'm sure people could most likely park there too. That's probably where we'll set up the grill. No trees/shade. It's a strictly business kind of place. If you want a place to sit, bring some lawn chairs. There's an air show at the FT Worth Alliance airport tomorrow between 10:30 and 4:30, so we'll probably be able to see some of the show from the shop. Good times!

 

yeah jake I usually just get a 1/4 drive ratchet and go at the plenum bolts with it, figure I can't get enough torque to snap the bolts with it. but by all means bring extras, to cut down on install time it would be great to have extra hands. also need data logging on the laptop I'm bringing and maybe someone to record some other things... still trying to think through all the details but I'll probably end up improvising when we get out there.

 

^ Make a list of what you remember now then look at it tmw, you might remember some stuff.


This is very exciting. Intake shoot out! Finally we can find out which are the best ones! :P

 

I have the grille packed up....not sure whose bringing food..I wont be bringing anythign since I wont be there that long....I will be up at the meeting spot for us locals over at old denton and George bush at 11:00.

also I have loaded up a folder of all my DIY's from motordyne, torque specs for all parts of the plenum etc.....will bring them as well.

 

Score!! Alright chris! Well I will be bringing buns and spicy mustard for the brats. Anyone bringing plates?

 

yeah I got them bud...6 rows behind the FC Dallas Bench!! free!

 

now that JOhn isnt going.. AKA BEER who else is bringing the grilling food?? If Jake has his big grille not sure I need to bring mine..it can only fit about 5-7 brats on it at a time if that.