FGC Picture/Chat about the meet thread...
#91
I would sell you mine but.... Stock G coupe springs probably will not give you a drop; if anything it would sit higher since the sedan weighs about 200lbs less than the coupe. The stock coupe springs would make your ride a little stiffer but that would probably be the only difference.
If you want a drop I'd recommend stock Z springs or aftermarket G or Z springs.
If you want a drop I'd recommend stock Z springs or aftermarket G or Z springs.
#93
Thanks guys, I have to check it agian but I've been reading sedan forms and the have what they call g/z drop and it's g35 coupe springs in front and 350z springs in the back or the other way around I have to see... Anyways I seen pics and it looks good. I will attach photo to next form, I have to find them agian.... It's not a huge drop but good enough for when I get my 19inch wheels that I want. I'm also looking for the z tube and the newer stlye mid pipe on the coupe I believe and the hr y pipe. Thanks guys! Have a fun a safe Christmas and dont forget to buckle up! Alot crazy people out there in these sports cars doing donuts!.....lol
That's interesting to go for g springs on one axle, and z springs on the other. But I know for the coupe, you can cut the rubber bump for the rear springs (separated coils and shocks) to effectively drop the car an extra 1/2" or so. I didn't do that for my springs, and my gap in the rear is slightly bigger.
Merry Christmas everyone! Today is my first of 5 doubles. Whew!
#95
#96
#101
#103
Teh Redhead Moderator
iTrader: (5)
lol, sorry, not up for driving 4 hours tonight
If you take I-4, it's a straight shot from LM. If you get off at either Lee Rd (exit 88) or Fairbanks (exit 87) you can get to the WPV. It's only a few exits past Altamonte. I would think it would take you less time to get there than to Waterford... but I don't know exactly where you live so idk.
At this point, we don't have anything set in stone and I have only heard 2 people interested in meeting tonight: Max and Chris. I have a TON of running around to do, and Waterford is going to be on the other side of town for me. I actually have to go to Altamonte right after work and then I'll be running the rest of my errands in WP. Ian has been extremely busy and I apologize to everyone for not being more organized this week. I'll blame it on the holidays. If you guys would rather just wait until the new year, we could try to have a big meet next week.
V
If you take I-4, it's a straight shot from LM. If you get off at either Lee Rd (exit 88) or Fairbanks (exit 87) you can get to the WPV. It's only a few exits past Altamonte. I would think it would take you less time to get there than to Waterford... but I don't know exactly where you live so idk.
At this point, we don't have anything set in stone and I have only heard 2 people interested in meeting tonight: Max and Chris. I have a TON of running around to do, and Waterford is going to be on the other side of town for me. I actually have to go to Altamonte right after work and then I'll be running the rest of my errands in WP. Ian has been extremely busy and I apologize to everyone for not being more organized this week. I'll blame it on the holidays. If you guys would rather just wait until the new year, we could try to have a big meet next week.
V