Welcome to the club. I just embrace it with grace. Acting like the kind of guy who takes every corner as if I were in Initial D.

Hopefully no ones can hear me saying ohhhhh sh*t as I do it

 

Yeah, one of my Hankooks looked like that, I decided it would be best to replace it before zdays

 

Both my rears look like except on the inside and I am running -2.3 camber

 

Lol

 

June came fast!

 

So I came around a corner *** first as usual and I noticed that the tires don't make any damn noise as I slid across the pavement. Kinda creeped me.

Also noticed the G sedans only hold like 3-4 spots on stance nation. Wtf?

 

So if you don't tighten the pulley back down and do donuts it's will destroy all your belts an disappear like hudini.

 

^ lol what now?

 

So I was getting off work and decided to stop the squalling of my belt. Forgt to tighten the damn pulley all te way down when I let one of the co workers drive it. So he brings it back and was like wow and I was like I hear something ooh shizz that pulley is loose. Tightened it down and then showed him how a real G rides. A few 0-60s and a donut later my power steering goes by by. And I was like must have popped the belt. No such luck I spun the a/c pulley slap the **** off. Couldn't find it in the lot so I put the power steering belt back on and limped home. Tomorrow I will have a new pulley and the right belts.

Warning if you delete your pulley no one will err give you the right belt without a part number. Don't even try the 06.5 because they all think it's the same.

 

Ps car lifts are the ****.

 

Pss I can get deals on tires for the club. How much depends on tire and time. Apparently they fluctuate a great deal (he said one time he sold the same set to two diff people and in four hours the price changed by 200 bucks). Anyway 10% shouldn't be a problem. Not huge by anymeans but still better than sh*t on a stick

 

If you google the part number, I believe there is another Infiniti that has the belt... like an 07 M or QX or something

This is true.

 

^ he has the same belt I have for the PS/Alternator Belt and an OEM Nissan for the AC. It had good tension on them. So not sure what happened, Was the Nut on the tensioners not tightened?

 

Yeah I went to tighten down the belts because of the squeak. Didn't put enough torque on the pulley. Good news is I used the store account and the pulley only cost me 42 bucks.

 

Hi