KPTechnologies Shift Lights
#234
#236
Joined: Aug 2003
Posts: 11,251
Likes: 15
From: Brandon, FL
#237
Joined: Aug 2003
Posts: 11,251
Likes: 15
From: Brandon, FL
more from kevin
Pin 8 – NC
Pin 9 – NC
Pin 10 – White/Green
Pin 11 – Red/White
Pin 12 – Blue/White
Pin 13 – Brown (Crank angle)
Pin 14 – Yellow
Pin 6 is the start of a row (pins 1-5 are a relay)
Pin 32 (above pin 13) – Pink
All wires match up to what the service manual says they should be.
Hope this helps
guys its not that hard
tom those pics you sent are right on
that wire you have should be the coorect one.
Pin 8 – NC
Pin 9 – NC
Pin 10 – White/Green
Pin 11 – Red/White
Pin 12 – Blue/White
Pin 13 – Brown (Crank angle)
Pin 14 – Yellow
Pin 6 is the start of a row (pins 1-5 are a relay)
Pin 32 (above pin 13) – Pink
All wires match up to what the service manual says they should be.
Hope this helps
guys its not that hard
tom those pics you sent are right on
that wire you have should be the coorect one.
#239
http://www.kptechnologies.com/forums
Go here (it's a secret world) and post your problems. Be prepared for a rapid fire slew of posts and it might help if you keep your screen name (he he he).
Did it fall back inside of your gauge pod maybe? Did the Power wire come undone?
Go here (it's a secret world) and post your problems. Be prepared for a rapid fire slew of posts and it might help if you keep your screen name (he he he).
Did it fall back inside of your gauge pod maybe? Did the Power wire come undone?
Last edited by neffster; 12-22-2005 at 10:09 AM.
#240
Joined: Aug 2003
Posts: 11,251
Likes: 15
From: Brandon, FL