Found this on Speedoptions.com, Power Enterprise Twin Turbo Kit for the Z33, would this kit bolt on to our G's? Or with minor modification?


POWER ENTERPRISE Z33 TWIN TURBO KIT



-Scheduled to be released in November 2003!

-400 hp at the rear wheels at 7.35psi of boost.

-All 304 Stainless Steel Construction

-Comes complete with all necessary hardware, fittings, etc.

-Front Mount Intercooler is included!

-Six NEW Fuel Injectors, Fuel Pump, and Regulator!

-High Capacity Oil Pan Included!

-MSRP is tentatively set at $7,980.00

The highly anticipated wait for this turbo kit is now over! Power Enterprise Co., Ltd (Japan) is proud to release a twin turbo kit for the US Market Nissan 350Z. The remarkably beautiful kit comes complete with everything necessary for a worry free installation. Power output is a very impressive 400 horsepower to the rear wheels at only 7.35psi of boost. The high-response PE 1420 turbochargers deliver smooth and useable power across the entire RPM band, and further enhances the overall driving characteristics of the US Market Z33 350Z. The kits will be available to for sale in November, 2003.

RB Motoring is an Authorized US Distributor of Power Enterprise Products. High-resolution images are available upon request.

For more information, contact Victor R. Reyes at (626) 961-9213 or via email at: victor@rbmotoring.com

Some products produced by POWER ENTERPRISE have been designed for off road vehicle applications. Certain products are legal for sale and use only on off road vehicles that may never be driven on the public highway.

http://speedoptions.com/articles/393...0853a0e7b26926


<font color=white>Pearl Ivory</font color=white> G35 Coupe 6MT Prem/SplashG/BSM, <font color=red>Injen CAI</font color=red>, <font color=red>Injen Super SES</font color=red>

 

minor modification, they are working on that for us i believe.

-moooooo

 

$8 GRAND!? I think they will be selling to a FEW very select customers. Even at 400 RWHP, who's gonna pony up that much cash?

G35 6MT/DG/Fully Loaded
[i]HyperGround Kit
350Z intake duct
K&N drop-in
Aluminum pedals
50%-35% smoke tint

 

I agree, seems like a lotta dough. I think $5K to $6K would be somewhat more reasonable. But 400RWHP is pretty damn good though.

 

Can the tranny even handle 400 Hp? I think it would need a "slight" modification as well.

 

yeah its kinda a dumb deal the 8 grand inclodes a new exuasht and headers and other crap tahts why its so pricy they need to just sell the turbo and intercooler and stuff needed for it. not the other [censored]

 

well you kinda need the new headers. and a new exhaust would be wise too. but i agree, 8 grrr is kinda steep. i hope it comes with some new headgaskets or pistons. if not, its not worth it. 10.3/1 c/r and FI is not a good match........


Doc

You have been weighed.....You have been measured.....and you have been found WANTING!!!

 

I dont see what G35 owner will pony up that cash. Besides ... G owners will need to find a way to mount the front mount intercooler. I dont think a lot of us will wanna mess with trying to fit a new bumper on the car and mess with beautiful lines of the car.

I would personally rather pony up the cash for the SUPERCHARGER and call it a day.

2003 G35C

 

In the whole entire list of parts included in the kit... i didnt see any ECU upgrades or any new FMU upgrades. isnt that kinda the most important part of the kit.

also ... how soon before you blow your motor on such high compression and such high boost. i'm sure the first thing will go if anything will probably the differentials and lsd since i'm sure they are not capable of handling that much power.

2003 G35C

 

its only running 5 punds of boost so the engine were should be low. If i was going to blow 8 grand on this kit i would also get the lower compression pistons and new rods.

 

You need to get the new pistons and rods...And 8 Grand is nothing when you see that you're getting a fuel system designed specifically with this kit...And yes, out trannies can handle the power...The VQ hasn't even come close to having its full potential unleashed...Nissan is extremely conservative, hence the heavy flywheels, restrictive fuel maps, and low peak RPMs...They're actually damaging the engine over time by being so conservative, and also losing power to the wheels...The coupes, however, have carbon fiber reinforced driveshafts, so an option if you're worried is to go with a full carbon fiber driveshaft upgrade if you're worried about the power delivery and the stock tranny handling it...

"All the Power in the World resides in the Eyes..."

 

8000 to buy the kit. Does any one ever think of the price of the install. Intstalling this kit would require the motor to be lifted. Thats alot of money right herr. be like another 8 grand to install!!!!!!!!!!

G35th UNITZ

 

If that is the case they will sell about 3 of them, ever. lol

 

where can you buy a full carbon fiber driveshaft for a G35?
I've looked everywhere on-line.

 

I haven't seen one specially made for the G, but my guess is that you can have one custom made for you.