Electrical Gurus - Nitrous Activation
#1
Electrical Gurus - Nitrous Activation
I posted this several months ago and didn't get a response. I hope I can get some feedback now. I want to put a relay for my nitrous kit to connect to the "Power" or "Cancel" buttons on the steering wheel. I can figure out how to configure the relay, but I need to know where I can tap into the wires (either at one of the control models, behind the radio, behind the steering wheel, etc.....) and what color wires I am going to need to tap.
Thanks in advance for your help.
’03 G35S 6MT, black/black:
-Zex n20 Kit 150-shot & Bottle Opener
-Amsoil Air/Oil Filters & Oil
-Digital Nitrous Pressure Gauge & A/F Switch/Gauge
-Pressure-based Bottle Warmer
-MSD Window Switch
Thanks in advance for your help.
’03 G35S 6MT, black/black:
-Zex n20 Kit 150-shot & Bottle Opener
-Amsoil Air/Oil Filters & Oil
-Digital Nitrous Pressure Gauge & A/F Switch/Gauge
-Pressure-based Bottle Warmer
-MSD Window Switch
#2
Re: Electrical Gurus - Nitrous Activation
actually I did respond to it.. you'd have to build some sort of interface that could read the resistor values coming from those buttons that would in turn actuate a relay that would do whatever you want. There is a steering wheel interface kit from PAC, called the SWI-X. You could do some modifications with it but it's going to be more work than its worth
04' G35 / 6MT / Tein Basic Coilovers
Volk 19" GT-7 Gunmetal
04' G35 / 6MT / Tein Basic Coilovers
Volk 19" GT-7 Gunmetal
#3
Thread
Thread Starter
Forum
Replies
Last Post
Freeman186
Engine, Drivetrain & Forced-Induction
1
09-06-2023 10:07 AM
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM
G35VSHNG37
G35 Coupe V35 2003 - 07
0
09-10-2015 01:54 PM