Best spot to hide your gauges on a G35
#227
#228
And Pivot speed meter in ash tray
upto 350km speedo
1/4mile time
Gforce accel and braking
Depo 4 in 1 gauge
Volt
Oil temp
Oil Pressure
Boost
- i dont know what the good or bad temp and pressure for oil is??? anyone?
TurboXS knock sensor and shift light (yes knock actually works..)
#229
Registered User
iTrader: (37)
Do you need to hook a wideband to the zetronix? or does it read the factory sensors?
I am getting too many gauges and I HATE the pillar pods I have 7 must have gauges and I would like to thin it out a little but I would also like a coolant temp gauge because i dont think the OEM one is right. With my big rad on the hiway the temps used to drop down to about 25% but now once the car warms up it wont move from 50% at all
I am getting too many gauges and I HATE the pillar pods I have 7 must have gauges and I would like to thin it out a little but I would also like a coolant temp gauge because i dont think the OEM one is right. With my big rad on the hiway the temps used to drop down to about 25% but now once the car warms up it wont move from 50% at all
#231
Do you need to hook a wideband to the zetronix? or does it read the factory sensors?
I am getting too many gauges and I HATE the pillar pods I have 7 must have gauges and I would like to thin it out a little but I would also like a coolant temp gauge because i dont think the OEM one is right. With my big rad on the hiway the temps used to drop down to about 25% but now once the car warms up it wont move from 50% at all
I am getting too many gauges and I HATE the pillar pods I have 7 must have gauges and I would like to thin it out a little but I would also like a coolant temp gauge because i dont think the OEM one is right. With my big rad on the hiway the temps used to drop down to about 25% but now once the car warms up it wont move from 50% at all
#232
Nice, i got same gauge.
And Pivot speed meter in ash tray
upto 350km speedo
1/4mile time
Gforce accel and braking
Depo 4 in 1 gauge
Volt
Oil temp
Oil Pressure
Boost
- i dont know what the good or bad temp and pressure for oil is??? anyone?
TurboXS knock sensor and shift light (yes knock actually works..)
And Pivot speed meter in ash tray
upto 350km speedo
1/4mile time
Gforce accel and braking
Depo 4 in 1 gauge
Volt
Oil temp
Oil Pressure
Boost
- i dont know what the good or bad temp and pressure for oil is??? anyone?
TurboXS knock sensor and shift light (yes knock actually works..)
#233
#234
LOL..I got the idea from your pictures and DIY thread. I PMed you about it before too.
What are you monitoring with the "USER P" input? Sorry I don't know normal oil pressure/temp either, hopefully someone can chime in with that information.
What are you monitoring with the "USER P" input? Sorry I don't know normal oil pressure/temp either, hopefully someone can chime in with that information.
#236
Ideally I would want to have my boost guage and AFR Gauges tied into a HUD system of some sort...
Combing this http://www.dashtronix.com/Gauge_Projector_LIU8.php
with this http://www.ebay.com/itm/OBD-2-II-HUD...sories&vxp=mtr
has anyone done such a thing?
I dont know about anyone else... but when I am wanting to look at my AFR and my boost.... its usually when I am at WOT.... and at that point the last place I want to be doing is looking down, to the side or up lol.
Combing this http://www.dashtronix.com/Gauge_Projector_LIU8.php
with this http://www.ebay.com/itm/OBD-2-II-HUD...sories&vxp=mtr
has anyone done such a thing?
I dont know about anyone else... but when I am wanting to look at my AFR and my boost.... its usually when I am at WOT.... and at that point the last place I want to be doing is looking down, to the side or up lol.
#238
Yeah it shows up like in the two pictures, as a solid 392. That's the only thing I don't like about the Zeitronix, I wish I could change the EGT to display something else like TPS or RPM. But I still get up to three inputs (boost, afr, and choice of multiple pressure/sensor) on one compact display so it was the best choice for me.
#239
I have no turbo yet... been waiting on my parts for 8 months and still not been sent...
so none of the gauge sensors are hooked up except for oil temp and pressure.
User P i will try and get boost to hook up to the Utec boost solenoid.. i wont know if its compatible until i try .
As for EGT, yeah as you can see from the above there is no sensor attached, but a figure still shows up
And Lance, you have too much $, dam you and all your custom CF !!!
#240
Oh yeah about the bracket lol!
I have no turbo yet... been waiting on my parts for 8 months and still not been sent...
so none of the gauge sensors are hooked up except for oil temp and pressure.
User P i will try and get boost to hook up to the Utec boost solenoid.. i wont know if its compatible until i try .
As for EGT, yeah as you can see from the above there is no sensor attached, but a figure still shows up
And Lance, you have too much $, dam you and all your custom CF !!!
I have no turbo yet... been waiting on my parts for 8 months and still not been sent...
so none of the gauge sensors are hooked up except for oil temp and pressure.
User P i will try and get boost to hook up to the Utec boost solenoid.. i wont know if its compatible until i try .
As for EGT, yeah as you can see from the above there is no sensor attached, but a figure still shows up
And Lance, you have too much $, dam you and all your custom CF !!!