Forced Induction Discussion of turbos , superchargers , and nitrous upgrades on the G35

need engine harness badly

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Nov 30, 2007 | 07:41 PM
  #1  
alan21's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: May 2005
Posts: 308
Likes: 0
From: Brick, New Jersey
need engine harness badly

i need an 03 to 04 g35 coupe 6mt engine harness anyone have one or know where i can get one?
 
Reply
Old Nov 30, 2007 | 10:50 PM
  #2  
Gspott's Avatar
Registered User
iTrader: (1)
Joined: Dec 2005
Posts: 140
Likes: 0
From: Alta Loma, CA. "In the 909"
Why is it that you need one..?? Is it the main harness..?? I think i need one also. The one that the O2 sensors connect to the exhaust manifold & cats.They were damaged when I ran over some tire tread & as it was rolling underneath my G, it damaged one of the connectors that goes to the passenger side "after cat" O2 sensor. The plug from the sensor that connects to the wiring harness. that connector from the harness got demolished, the only thing left is the actual pins that connect to the sensor. Luckily, the 2 sides still connect but don't want to keep it like that. Deffinitely could be problematic in the future. Water intrusion etc. I'm not sure if a new plug could be spliced in or what..?? Going to West Covina Nissan in morning so it can be checked out & reset my "check engine" light that lit up after the sensor was disconnected. Anyone of you guys have some suggestions..??
 
Reply
Old Dec 1, 2007 | 12:46 AM
  #3  
alan21's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: May 2005
Posts: 308
Likes: 0
From: Brick, New Jersey
i got a built motor and engine harness is damaged and i dont want to reuse it
 
Reply
Old Dec 1, 2007 | 12:06 PM
  #4  
alan21's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: May 2005
Posts: 308
Likes: 0
From: Brick, New Jersey
anyone please i want to start my car up
 
Reply
Old Dec 1, 2007 | 07:54 PM
  #5  
accordfreak's Avatar
Registered User
iTrader: (14)
Joined: Jun 2003
Posts: 3,226
Likes: 17
I have an engine harness from a 2003 6mt 350z. UNCUT. It doesn't have the injector extension harness though but you can disconnect yours and plug it into this one.

$240 shipped.

 
Reply
Old Dec 1, 2007 | 08:05 PM
  #6  
alan21's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: May 2005
Posts: 308
Likes: 0
From: Brick, New Jersey
let me look at my harness thats damaged and compare it to this one. Yours looks like it has one additional plug after the gromet where it enters the car...
 
Reply
Old Dec 1, 2007 | 08:06 PM
  #7  
accordfreak's Avatar
Registered User
iTrader: (14)
Joined: Jun 2003
Posts: 3,226
Likes: 17
Originally Posted by alan21
let me look at my harness thats damaged and compare it to this one. Yours looks like it has one additional plug after the gromet where it enters the car...

let me know if you need any close up pictures..
 
Reply
Old Dec 1, 2007 | 08:39 PM
  #8  
alan21's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: May 2005
Posts: 308
Likes: 0
From: Brick, New Jersey
its different it has one extra connector
 
Reply
Old Dec 2, 2007 | 09:30 AM
  #9  
alan21's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: May 2005
Posts: 308
Likes: 0
From: Brick, New Jersey
bump i really appreciate all the pms but i dont think the one off a 6mt 350z will work bc of the extra connector can anyone tell me for sure?
 
Reply
Old Dec 2, 2007 | 04:00 PM
  #10  
alan21's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: May 2005
Posts: 308
Likes: 0
From: Brick, New Jersey
bump need a harness asap!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Reply
Old Dec 2, 2007 | 06:11 PM
  #11  
Audible Mayhem's Avatar
Former G35driver Vendor
iTrader: (13)
Joined: Jan 2005
Posts: 2,751
Likes: 1
From: Maryland
the G35 and Z harnesses are different.

if oyu need one

call jim at www.turbo-toys.com , tell him i sent ya!!
 
Reply
Old Dec 3, 2007 | 12:37 AM
  #12  
2slo2bfurious's Avatar
Florida G35 Club, General Member
iTrader: (5)
Joined: Nov 2003
Posts: 1,335
Likes: 2
From: Broward
I have one for an extra 2003 harness too, but the o2 sensor plugs are different from my 2004's harness. So if you have an early 2004 maybe its the same... pm me I'll give it to you for cheap if its the one you need.
 
Reply
Old Dec 3, 2007 | 07:30 AM
  #13  
Audible Mayhem's Avatar
Former G35driver Vendor
iTrader: (13)
Joined: Jan 2005
Posts: 2,751
Likes: 1
From: Maryland
the plugs are different on the later 2004s , they changed over to airflow meters in the exhaust manifolds instead of o2 sensors.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hasanbaloch
Engine, Drivetrain & Forced-Induction
15
Feb 29, 2024 08:45 PM
03sedang35
Engine, Drivetrain & Forced-Induction
1
Aug 29, 2015 07:56 PM
StephonW
Engine, Drivetrain & Forced-Induction
2
Aug 29, 2015 01:24 AM
newg37
G35 Coupe V35 2003 - 07
1
Jul 26, 2015 09:32 AM
Jadenkid22
G35 Coupe V35 2003 - 07
0
Jul 14, 2015 12:33 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:14 AM.