MAP Sensor Installation - Anyone? - G35Driver - Infiniti G35 & G37 Forum Discussion

Dec 11, 2007 | 06:22 PM

sliderg35

Thread Starter

Registered User

Joined: May 2005

Posts: 1,282

Likes: 8

From: Canada

MAP Sensor Installation - Anyone?

Has anyone installed their own MAP sensor? I'm going to be doing this soon and I could use any pointers people have to offer. (Where is the best place to put it? Did you drill or just tap a vacuum line?)

Dec 11, 2007 | 07:23 PM

waijai

i.love.gold

iTrader: (51)

Joined: Jan 2003

Posts: 10,598

Likes: 18

From: Dallas, TX

tee'd mine off the line going to my BOV

Dec 11, 2007 | 07:44 PM

ttrank

Grocery getter

iTrader: (57)

Joined: Jul 2005

Posts: 27,305

Likes: 190

From: Phoenix

Mine comes right off the manifold and goes to the UTEC. Most of the boosted guys on here will have one.

Dec 11, 2007 | 08:44 PM

6spG

Registered User

iTrader: (5)

Joined: Aug 2005

Posts: 738

Likes: 1

From: VA

Quote:

Originally Posted by ttrank

Mine comes right off the manifold and goes to the UTEC. Most of the boosted guys on here will have one.

Same here but I have a T-fitting that goes to my boost gauge.

Dec 12, 2007 | 09:10 AM

rcdash

Registered User

iTrader: (4)

Joined: Oct 2004

Posts: 2,173

Likes: 32

From: NC

Just uncap the spare port off the manifold and plug it in with a bit of non-collapsible tubing.

Dec 12, 2007 | 01:13 PM

QuadCam

Registered User

iTrader: (7)

Joined: Oct 2002

Posts: 2,474

Likes: 11

From: Vero Beach, FL

You can also drill and tap the manifold if you want to.

I chose to drill/tap right below the big vacuum port for the power brakes.

Dec 13, 2007 | 11:12 AM

sliderg35

Thread Starter

Registered User

Joined: May 2005

Posts: 1,282

Likes: 8

From: Canada

Thanks for all the replies! I'm going to try to avoid drilling into the manifold because I don't want to take it off to add the sensor. If I get good results with the T-fitting, I'll leave it at that.