So im waiting on my procharger kit to arrive. its from a Z.

Do I need to do anything special to make it fit?

Also coming with walbro, 440cc injectors, and tuned utec and wideband as well as 9psi pulley.


anything else recommended? and can I run the 9psi pulley daily driven and not worry about the engine blowing? I dont push my car very often maybe twice a month.

Any info is very helpful and also if anyone has an instruction manual for this kit install please?

 

Do not rely on somebody else's tune. Have it tuned for your car.

 

And have someone install it WHO KNOWS WHAT THEIR DOING for crying outloud- If I hear about one more person not doing the MAS thing correctly and blowing it up again im going to

ugh just fail.

Addition: as always there is always the chance for you to blow your motor on or off boost. From my years of reading these forums, I wouldn't worry about it personally- But I'm not a mechanic/tuner!

 

get someone that knows how to tune our cars and has a good rep. Lots of idiots that claim they can tune VQ35 motors that don't know ****

 

you want guages at the minimum. You also should have the install done by a professional

 

get NGK Spark plugs one step colder and a good tuner. Also i would recom. geting a a/f, boost, and oil temp gauge.

 

well as far as the tune I know I need someone else to do. thats not a problem. As far as the kit it shoudlnt be a problem for me to install. i have a lot of experience from my maxima with the stillen/vortech kit and im sure the install should be pretty similar unless there is some special thing that I should know about the procharger kit. Just wondering if there are any components missing from that combo and if the 9psi pulley can work fine daily driven on the vq35. ordering soem gauges atm and also the spark plugs.

 

anyone able to email me instructions please?