Greddy TT, Turbonetics? etc?
I was thinking about the greddy but it makes less hp than the turbonetics single turbo?

 

are you going to build the block? if not im looking into the powerlab single turbo kit. you might want to check into that one

 

i think you should do more research if your going to believe what you just typed. you have WAY more potential with the greddy than the TN kit.
SEARCH MY FRIEND. SEARCH

 

^+1, Greddy TT or Powerlab ST. Stock block or Built Block?


Read This
https://g35driver.com/forums/forced-...ion-noobs.html

 

sweet thanks for the help. im guessing the turbonetics is also the easier install.

 

stock block

 

just search. everything you need is in the threads in the forced induction forum

 

depends on how much power you want

turbonetics max ~440rwhp but a few people on my350z have gotten up to 530+rwhp

greddy TT easily 600rwhp

powerlab st can also easily get you to 600rwhp, more if you upgrade to GT-37

research!

 

Do a search as this has been asked a thousand times.

 

Go with the APS http://www.airpowersystems.com/products_usa.html

 

APS has a great setup... i'd say depends on what ur lookin' for. you want plug & play then get the JWT TT or the APS TT, ya want room to expand then hit up the GReddy TT.

 

Sound Performance
I have their setup (51mm turbos) on their built block though.

But on base boost (9psi) and super conservative tune for engine break in, we made 393rwhp through the stock exhaust......probably left 30-50rwhp on the table just in exhaust.

(we'll have low boost and high boost numbers soonly)

Tom

 

speed force racing with dual gt35r's
if money isnt an issue, go big!

 

OFMAOMFAOMGONFAOIJDSALKDJSAEKJRWL WTF

PLEASE READ!!!!!!!!

I'd do a custom turbo kit if I had to do it all over again actually.

 

Or a setup that you can go with small turbos for stock motor and twin 67 after you build the motor