weapon R? might work since it made to work with stock "air ram"
http://www.eracingworks.com/Weapon-R...1-p-39168.html
i like the concept but dont know if it actually works as well as Mr_pharmaD one

 

This looks like the one that Mr PharmD is using. http://www.eliteengineeringusa.com/Catch_Can.html I think I am going to order one for when I install my Vortech V3.

Ian

 

Jaz mini breather 605-375-01 $42.50
1-800-525-8133 to order from Jaz

 

I have that one on my car. We cut it in half and made it into two parts; one half is a catch can and the other is a crank breather for the back side of the driver valve cover.

 

Which catch can is the one that I usually se right in the front of the engine bay with 3 hoses to it?

 

You mean like these?



If so, that is the blingtastic ARC catch can.

 

Yeah, that one (^^^) Will that work with the vortech?

 

If you look at this pic from Vortech's website, I'm thinking it'd take a bit of creativity to route the hose to the driver's side past the main serpentine belt, but I'm sure it could be done (and probably has been...hopefully someone on this forum with that setup will chime in).

 

I would just hook a breather the driverside bc no much oil comes out of that one. The passenger pcv has the most oil.

 

I found a AGP baffled oil catch can made for the SRT4 on eBay for $20. Worked out perfectly in my opinion. I drain whatever is in there every few oil changes. Its not much. Maybe a teaspoon...