My question is if you're getting a Vortech tuner kit installed, are these supplemental parts all you need or is there anything else? I will be bringing the kit and parts to a shop to have everything installed and tuned there. I have been reading up and this is what I think will be necessary.

-Vortech V3 tuner kit
-Utec unit
-DW 660 injectors
-Walbro Fuel Pump
-Stage 4 Clutch/Flywheel combo

Also considering a 5/16 plenum spacer, and 3.9 final drive. As far as exhaust, I don't want anything too loud so maybe the HR Y pipe and coupe middy. Is there anything else to look into? Gauges, intake....

Thanks in advance!

 

List looks good.

Exhaust will allow you to run lower boost without lowering hp. For example I am only running 6.5lbs but getting 375 b/c of headers, test pipes, and exhaust...and other stuff.

No no to intake...it is on your blower.

I would get an oil pan spacer just to have some more oil in there...just a safety thing. And if you want to be real safe, an oil cooler. (GTM's is good and complete)

Gauges...A/F for sure. If you want more...Boost, Oil Pressure/Temp.

 

Thanks. I'll keep that in mind.
PM sent.