vortech fuel ?
Joined: Oct 2008
Posts: 92
Likes: 0
From: Salem, New Hampshire
vortech fuel ?
ok everyone i have a 06 5AT g35 coupe and i have a vortech supercharger im going to be installing this weekend and i have a couple questions to ask. I searched for days on here and on my350 and couldnt find what i was looking for. I have the vortech with the 3.12 that im going to be putting on and didnt no what i should be doing for my fuel system. I all ready have RC440cc injectors and wasnt sure if i should just get a walboro 255 intank pump and junk the stock vortech fuel stuff or just use the stock stuff with stock injectors?? the mods i have on the car right now are... i will also be tuning with a UTEC
FI exhaust
stillen high flow cats
5/16 copper spacer
VB upgrade
im looking to be at or around 380 with the 3.12 pullie and the mods i have right now.. is that to much to be shooting for with that set up? and im not looking to really go anything more then that.
thanks alot
John
FI exhaust
stillen high flow cats
5/16 copper spacer
VB upgrade
im looking to be at or around 380 with the 3.12 pullie and the mods i have right now.. is that to much to be shooting for with that set up? and im not looking to really go anything more then that.
thanks alot
John
I would say sell the 440's and get 600cc injectors and a walbro...safe and easy. You should be able to get somewhere around your goal of 380...its all dependent on how aggressive you want to be with your tune, what dyno you are running on, ect...too many variables to list.
Best of luck.
Best of luck.
Thread
Thread Starter
Forum
Replies
Last Post
seagrasser
G35 Cars
17
May 3, 2022 09:43 AM
Hogbone
Engine, Drivetrain & Forced-Induction
2
Sep 28, 2015 06:44 PM



