Initial Dyno for Procharger on 350Z!!!!!
Initial Dyno for Procharger on 350Z!!!!!
taken from http://www.my350z.com/forum/showthre...4&pagenumber=8
"OK guys, here it is. I finally got a copy of Mike's initial dyno from the ATI procharger install! Keep in mind this is UNTUNED with no adjustments. You can see between 80-100mph that the A/F richens up quite a bit and you can see the corresponding power dip. Once Mike leans it out some in that range it will gain that power back.
One thing to notice is how smooooth the power curve is. The power comes on early and stays linear all the way to redline!
Hopefully Mike will get to tune it in the next week or so. He wants to take it to the strip before he tunes it to get some initial time slips to show as well.
here it is...
"
keep in mind this is just an initial dyno...no tuning. All I have to add is: WHOOOHOOO! :grin:
2003.5 6MT Coupe || Black/Graphite || Premium || Aero || Tint || Al. Pedals
"OK guys, here it is. I finally got a copy of Mike's initial dyno from the ATI procharger install! Keep in mind this is UNTUNED with no adjustments. You can see between 80-100mph that the A/F richens up quite a bit and you can see the corresponding power dip. Once Mike leans it out some in that range it will gain that power back.
One thing to notice is how smooooth the power curve is. The power comes on early and stays linear all the way to redline!
Hopefully Mike will get to tune it in the next week or so. He wants to take it to the strip before he tunes it to get some initial time slips to show as well.
here it is...
"
keep in mind this is just an initial dyno...no tuning. All I have to add is: WHOOOHOOO! :grin:
2003.5 6MT Coupe || Black/Graphite || Premium || Aero || Tint || Al. Pedals
Guest
Posts: n/a
Re: Initial Dyno for Procharger on 350Z!!!!!
that is nice! kudos to procharger for providing an excellent alternative to the turbo.
I have a few questions though..
1. what gear was this in?
2. do you also have a dyno sheet of hp vs. rpm?
3. is this a setup including a FMIC?
thanks in advanced... and i really have to say, that is one lucky g.
'03 Infiniti G35 Coupe M6
GTR - R = g35 coupe
I have a few questions though..
1. what gear was this in?
2. do you also have a dyno sheet of hp vs. rpm?
3. is this a setup including a FMIC?
thanks in advanced... and i really have to say, that is one lucky g.

'03 Infiniti G35 Coupe M6
GTR - R = g35 coupe
Re: Initial Dyno for Procharger on 350Z!!!!!
1. I'm assuming it was done in 4th.
2. The guy is going to do some more dyno runs on Monday. He'll get the HPvs.Torque curve then.
3. I'll let the pictures talk.



Aeromotive FMU
2003.5 6MT Coupe || Black/Graphite || Premium || Aero || Tint || Al. Pedals
2. The guy is going to do some more dyno runs on Monday. He'll get the HPvs.Torque curve then.
3. I'll let the pictures talk.



Aeromotive FMU
2003.5 6MT Coupe || Black/Graphite || Premium || Aero || Tint || Al. Pedals
Re: Initial Dyno for Procharger on 350Z!!!!!
Wait a sec...is that the procharger kit that's available for like 5k already? I might be ignorant, but it looks like that 350z has more mods than just the supercharger...i.e. it seems like that's an aftermarket intercooler...or maybe that's stock?! but i didn't think so....
-thanks
SPIRITRACING@AOL.COM
<font color=red>@@.:':.:':.EAT MY DUST.:':.:':.@@</font color=red>
-thanks
SPIRITRACING@AOL.COM
<font color=red>@@.:':.:':.EAT MY DUST.:':.:':.@@</font color=red>
Re: Initial Dyno for Procharger on 350Z!!!!!
Here is the HP/Torque graph that they just did.
note: this is only with 6.2 #'s of boost
2003.5 6MT Coupe || Black/Graphite || Premium || Aero || Tint || Al. Pedals
note: this is only with 6.2 #'s of boost
2003.5 6MT Coupe || Black/Graphite || Premium || Aero || Tint || Al. Pedals
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
Dec 18, 2018 05:43 PM
350z, ati, charger, dyno, dynos, horsepower, hp, install, installation, numbers, pro, procharged, procharger, progcharger, turbo, whp




