Future Models Questions, requests, info on Future Infiniti/Nissan Models

Lets take a step back and consider the G37 sedan.

Old Jan 18, 2008 | 10:17 PM
  #16  
Mr_Ryte's Avatar
Registered User
Joined: Jul 2002
Posts: 389
Likes: 0
Originally Posted by JoryWLU
I have a close friend who works at the top for infiniti.
What the hell; today's been kinda slow.....

What does your friend know about the next FX and the next Q?
 
Reply
Old Jan 18, 2008 | 10:36 PM
  #17  
mal_TX's Avatar
Registered User
Joined: Jan 2006
Posts: 394
Likes: 0
RWHP according to automobile magazine for the G37 6MT is 287. For a G35 Coupe on the same dyno, their number is 236. I've seen stock G35 sedan dynos at 245. For fun, let's assume the current sedan weighs 3500lbs. This means:

14.3 pounds per horsepower vs. 12.2 pounds per horsepower, assuming the engine weighs about the same. That's a significant difference not to be ignored or dismissed.

Additionally, my average MPG is 2mpg higher in my 08 G37 vs. my previous 2006 G35, both 6mt.

So, the new engine produces more horsepower on less fuel. It also has much improved low-end torque, as you can see in the dyno overlays on this page:

http://www.automobilemag.com/reviews...rts/index.html

The only point that might be worth something is the new technology in the engine. V-VEL is in fact new to the G37 engine and thus is unknown. It could start blowing up like grenades or it could be more reliable than the older motor, which has a history of oil consumption issues.

In summary... I call B.S. on most of the original post.
 
Reply
Old Jan 18, 2008 | 11:34 PM
  #18  
bruddahmanmatt's Avatar
Registered User
Joined: May 2007
Posts: 1,684
Likes: 1
From: Honozooloo, HI
Originally Posted by mal_TX
RWHP according to automobile magazine for the G37 6MT is 287. For a G35 Coupe on the same dyno, their number is 236. I've seen stock G35 sedan dynos at 245. For fun, let's assume the current sedan weighs 3500lbs. This means:

14.3 pounds per horsepower vs. 12.2 pounds per horsepower, assuming the engine weighs about the same. That's a significant difference not to be ignored or dismissed.

Additionally, my average MPG is 2mpg higher in my 08 G37 vs. my previous 2006 G35, both 6mt.

So, the new engine produces more horsepower on less fuel. It also has much improved low-end torque, as you can see in the dyno overlays on this page:

http://www.automobilemag.com/reviews...rts/index.html

The only point that might be worth something is the new technology in the engine. V-VEL is in fact new to the G37 engine and thus is unknown. It could start blowing up like grenades or it could be more reliable than the older motor, which has a history of oil consumption issues.

In summary... I call B.S. on most of the original post.
VVEL is new to Nissan/Infiniti, but it's not an altogether new concept. BMW's Valvetronic system has been around since 2001.
 
Reply
Old Jan 18, 2008 | 11:39 PM
  #19  
Mr_Ryte's Avatar
Registered User
Joined: Jul 2002
Posts: 389
Likes: 0
Originally Posted by bruddahmanmatt
VVEL is new to Nissan/Infiniti, but it's not an altogether new concept. BMW's Valvetronic system has been around since 2001.
What about the SR20VE? That had VVL from late 90's....
 
Reply
Old Jan 19, 2008 | 01:29 AM
  #20  
bruddahmanmatt's Avatar
Registered User
Joined: May 2007
Posts: 1,684
Likes: 1
From: Honozooloo, HI
Originally Posted by Mr_Ryte
What about the SR20VE? That had VVL from late 90's....
Different systems. VVL used hydraulic pressure switch between two sets of cam lobes to vary timing, lift and duration. This system was similar to Honda's VTEC system. However, like VTEC it was a two step system and not infinitely variable like VVEL or Valvetronic. With VVEL, the system uses an arrangement of links to actuate the valves. These links have their fulcrums continuously adjusted by a control shaft driven by a DC motor to determine how much lift the output cam places on the lifters. Toyota (Valvematic) and Honda (Advanced VTEC or AVTEC) have both announced similar systems to be implemented in the near future.
 
Reply
Old Jan 19, 2008 | 02:04 AM
  #21  
Mr_Ryte's Avatar
Registered User
Joined: Jul 2002
Posts: 389
Likes: 0
Originally Posted by bruddahmanmatt
Different systems. VVL used hydraulic pressure switch between two sets of cam lobes to vary timing, lift and duration. This system was similar to Honda's VTEC system. However, like VTEC it was a two step system and not infinitely variable like VVEL or Valvetronic. With VVEL, the system uses an arrangement of links to actuate the valves. These links have their fulcrums continuously adjusted by a control shaft driven by a DC motor to determine how much lift the output cam places on the lifters. Toyota (Valvematic) and Honda (Advanced VTEC or AVTEC) have both announced similar systems to be implemented in the near future.
<.....smacks head.....>

Man, completely forgot about that. The "variable" in the variable lift was either regular or extended (forgot the exact numbers). The NeoVVL in the SR20VE doesn't have anywhere near the range that the VQ37VHR VVEL has.
 
Reply
Old Jan 24, 2008 | 04:50 PM
  #22  
jaspergtr's Avatar
Registered User
Joined: May 2004
Posts: 6,067
Likes: 0
From: fayetteville, nc
i guess this is what i sound like when i try to explain computers to my mother.
 
Reply
Old Jan 24, 2008 | 07:40 PM
  #23  
monkey's Avatar
Registered User
iTrader: (1)
Joined: Aug 2005
Posts: 84
Likes: 0
From: Oakland
Sorry, I'm a newb to the forums, but damn, I did enjoy that SMACKDOWN. Thank you all for an entertaining pwnawanange....
 
Reply
Old Jan 24, 2008 | 08:10 PM
  #24  
WRAH's Avatar
WRAH
Joined: Aug 2003
Posts: 5,708
Likes: 0
From: Columbus, OH (Area)
Originally Posted by UltimateGee27
didnt seem that bad to me....ive seen much worst on Driver.

Nice write up non the less. I dont really think its a big deal to anyone if its a 35 or 37 at this stage in the game seeing as tho the power increase isnt that much and performance difference is minimal.

IMO I like the sound of 35 as oposed to 37 lol

But then again i like the sound of 63 as oposed to 55
Like me!!!
 
Reply
Old Feb 25, 2008 | 04:37 PM
  #25  
jaspergtr's Avatar
Registered User
Joined: May 2004
Posts: 6,067
Likes: 0
From: fayetteville, nc
the original poster was right on according to the press release.
 
Reply
Old Dec 5, 2011 | 05:57 PM
  #26  
ImIn06GT's Avatar
Registered User
Joined: Dec 2006
Posts: 804
Likes: 0
From: NJ
Originally Posted by JoryWLU

Now, if you going to wait for the G37. you might as well wait until the 2011 redesign. Cause once your g37 is two years old it will be out of date.
fail!!!!! where is the redesign?????
we are in 2012 models now, hahaha
 
Reply
Old Feb 16, 2012 | 11:51 AM
  #27  
TT C6's Avatar
Registered User
Joined: Jan 2006
Posts: 208
Likes: 0
I gotta admit, the 2nd Gen G35 felt MUCH more powerful and quicker than the 1st Gen G35.

However, when I went to trade my 08 G35x for a new G37x, I did NOT feel much of a power/performance difference at all.
This came as a shock to me, but I was very happy to keep that money and redirect it towards my GTR fund. LoL
(I'm hoping for a Infiniti version of the GTR with 4 doors and a magnetorheological dampening suspension with adjustability.)

But, I will do the same evaluation on the next gen AWD G sedan.
DSG, performance AWD, and a Mercedes 6.3L, and FOLD FLAT REAR SEATS in a G sedan would be a "must buy" for me.
 

Last edited by TT C6; Feb 16, 2012 at 11:58 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tukeeg35
Engine - Electrical
2
Aug 19, 2015 02:08 PM
apintojr
G35 Sedan V35 2003-06
0
Jul 23, 2015 10:52 AM
myaso
Lighting
0
Jul 22, 2015 10:34 PM
Tony_Me22
G35 Sedan V35 2003-06
8
Jul 17, 2015 06:30 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:26 AM.