Pics of my parrot bluetooth
Joined: Sep 2007
Posts: 5,705
Likes: 53
From: Quahog RI
Pics of my parrot bluetooth
Im bored and on a month vacation. So I figured id post some pics. A few months ago I bought and installed some stuff. Parrot bluetooth (80.00 on ebay), wire harness for bluetooth (165.00 on internet) and Ipod interface (165.00). Bluetooth is the best no one knows they are on speaker also great for fellow 6mt guys. Ipod interface is pricey but its a must have. I didnt post directly because of pics sizes and general not knowing how.lol.
http://www.cardomain.com/ride/2775216/2 should be direct link
http://www.cardomain.com/id/05on20s my main page. go to page 2 of g35 page
http://www.cardomain.com/ride/2775216/2 should be direct link
http://www.cardomain.com/id/05on20s my main page. go to page 2 of g35 page
Joined: Sep 2007
Posts: 5,705
Likes: 53
From: Quahog RI
The Ipod works with your "SAT" on your radio. The plug is behind your rear seat in a sedan. It also has a interface, splitter or what ever you wanna call it, that you basically cut into your rear seat foam. Its a little box and is hidden well under there and you cant feel it when you sit down. With console removed drill a hole for the wire to come through. Feed wire though and reassemble. Im pretty sure Everythingg35.com has a walk through or maybe this site had it. It was 165.00 when I got it
The bluetooth kit can be a pain. I got the 3rd party wire harness which was 100 percent plug and play. All you do is unscrew shift ****,pop apart the console, remove 12 volt plug trim plates, pull the clock trim panel towards you. Remove radio and harnesses, use the new ones then reassemble. Its kind of a pain too reassemble because there are so many things that make the kit work plus all the 3rd party stuff. I think I dropped down the glove box too so I could hide wires back there. Also to run microphone you gotta drop down the headliner. Then mount the switch where ever you want
ipod link and write up link http://www.g35parts.com/9083/osc/pro...oducts_id=521k
parrot 3rd party wire harness i got at www.quickconnectproducts.com
The bluetooth kit can be a pain. I got the 3rd party wire harness which was 100 percent plug and play. All you do is unscrew shift ****,pop apart the console, remove 12 volt plug trim plates, pull the clock trim panel towards you. Remove radio and harnesses, use the new ones then reassemble. Its kind of a pain too reassemble because there are so many things that make the kit work plus all the 3rd party stuff. I think I dropped down the glove box too so I could hide wires back there. Also to run microphone you gotta drop down the headliner. Then mount the switch where ever you want
ipod link and write up link http://www.g35parts.com/9083/osc/pro...oducts_id=521k
parrot 3rd party wire harness i got at www.quickconnectproducts.com
Thread
Thread Starter
Forum
Replies
Last Post
FS[NorEast]: New OEM G35x Compression Rods - Save!!
The Fixer
Steering & Suspension
15
Nov 1, 2015 03:26 PM




