hi i have a 2003 g35 coupe and putting a compustar alarm in it how do i run the wires to the door locks iin the drivers door.i cant get a spot to run them through the rubber boot because thee plug is blocking me am i missing something or is there a easier way to hook them up plz help cars all pulled apart and im stuck on how to get the wires ran to the switch.

 

As the republicans say, drill baby drill! I don't think there is an easier way to get into the cab of the car. A temporary solution is to run the wire underneath the weather stripping and then use some of the grommets that are in the door to connect to the switch. That is more of a testing solution, not a final solution.

 

Forgive me if I'm wrong, but can't you just tap in to the wire under the dash? Sorry, I don't know what wire that is though.

 

k ,what i did was i unplugged the plug which connects through the car ran the wire through the rubber sleeve and then removed the other side of the plug and ran the wires through then put the plug back and reconnected the other end of the plug again thanks for the help guys