I just purchased my G last month and for some weird reason there looks like there is moisture or fog inside the cluster close to the trip reset button. So i need to remove the plastic and clean that up.....its driving me crazy looking at it.

Is there a DIY on removing it? Thanks

 

If you've done a SEARCH and can't find what you need check with www.infinitihelp.com. There's a ton of information on that site....
Gary

 

Try the tech area.

 

let's see... If I can remember how I removed mine out of an 04 coupe

Removed the screws from the steering column (philips and there are a few), Had two 10mm bolts on the bottom that you need to use an extention on. Remove the turn signal and windshield wiper things. Remove a few more screws that you see and then yank and pull. Haha, I don't think this will help much, but if you're like me you'll figure it out once you take it apart

 

my fault i was lazy and didnt search. I found what i needed. But thanks for your help