So i was changing all of my interior lights to white LEDS. while changing the light on the buttom of the door the bulb slipped out of my finger and fell inside of the damn panel!! Now when i drive i hear the damn thing rolling back and forth inside the door panel. MY questions is do i need to removed to the door panel or can i just pull the clips out from the bottom of the door? if i pull the clips will the bulb fall out? i have a Gcoupe btw.

 

Nope just look under your door and get a flat head screw driver pop out the light housing and install new bulb and push back in

 

same thing happened to me. just stick ur fingers in there u should be able to bring it up..it takes a while but u just have to try differentn methods of trying to grab it

 

I would atleast take the screws out of the door handle and then pry it up

 

no need to take the screws out.. it pops right out

 

ah, your talking about just popping out the housing...should be fine

 

I tried this and just scratched my hand up. Ill give it another try... IF you guys say i can just pry the door from the bottom then ill give that a shot aswell aslong as i dnt break anything

 

You only have to remove three screws to properly pry up the lower half of your door. (I wouldn't bother un-clipping any wires for what you need though)

https://g35driver.com/forums/body-in...l-removal.html

If you don't.. just make sure you don't pry the bottom too much, as to break/crack the upper door.

 

Thanks for the help Guys i managed to get the bulb out