I'm looking at buying a set of 20" wheels with an offset of +25.

20X8.5 +25
20X10.5 +25

Will a 295/30/20 fit in the rear of my coupe? It isn't lowered, fenders are not rolled. Worried about it chewing tires on the rear.

Thanks guys.

 

Why so big? Don't plan on lowering it?

 

I do want to lower it in the very near future. I don't want to do any aggressive fitment on my G. Just want the widest tire possible. looks bad *** + 295/30/20 from General Tire costs a lot less than all the 285/30/20 tires I was looking at.

 

BlueballZ, well alright...you can use the 295s but visually there's not a major difference between 285s and 295s. When you lower your G you may need to have your fenders rolled depending on how looooooow you go....
Gary

 

Im running a 285/30/20 with 25 offset. If you plan on lowering it you WILL need to roll or cut off the fender lip. Im running -2 degrees of camber in the rear and Im just clearing the fender(cut off my lip). Youre definitely gonna cut up some sidewalls with a 295

 

Thanks Gary C.


G2FLIP4
I will have to roll the rear then. What if I wanted to run a 305 section width in the rear...lol? Is +25 on a 10.5" wide rear wheel enough to clear the rear lowered with just rolling the fender?