Hi!! I need some help here.

Recently I brought a set of wheels with these offset,
19x9 +42
19x10 +47

I'm thinking of getting a 15mm spacer for the front and 20mm spacer for the back. Anyone know if it will flush with the fender?

I have a 2005 G35 coupe.

Any help is appreciated.

Thanks in advance.

 

Are you dropped? If so, how much? Depends on your camber too.

But no, even with those spacers you won't be flush. I'd at least get 30mm spacers all around. But even with 30mm spacers, you won't be flush IMO.

 

+1 on that.

Even with those massive spacers, you wouldn't be very flush with the fender at all. Honestly, those offsets are more for a Sedan then a coupe.

Hell, the offsets on OEM Rays are better then those, no offense.

 

+1^

Those are sedan offsets. It will be nearly impossible to get the flush, especially with a drop.

 

Nope... my car is not drop. Yeah... those are sedan offset. Maybe I should just sell it.

 

You can get 30mm spacers all around and it'll be flush with the fender.

 

Buy 38 mm spacers all around. Roll the rear fenders

 

[QUOTE=xXHotelCrazyXx;5217301]Buy 38 mm spacers all around. Roll the rear fenders[/QUOTE

I was going to say that, but it would only look good if he dropped the car.

 

I'd sell them if I were you, then put the money towards better wheels. You're gonna be spending an extra $150+ on spacers, and they still most likely won't look the way you want them to.

 

yikes absolutely horrible offsets, I would just sell them

 

What +42 and +47? FTL. I'd sell the asap and get some lower offsets. If you keep them throw some 38mm spacers. Only way to look good.