Reflecting on mods this year. What have you done?
#31
Wow people have rediculous lists. Got my 35 in February and started modding in June.
Things done so far:
Clear corners w/ black housing
5/16 spacer
06 projectors
Full interior LED
Got my stock 17s powdercoated (for free )
Debadged
Powdercoated front grill black
BC Coilovers
ART pipes
Shockwave TDXV2
Next years mods:
75k maintenance
Stillen or momentum intake
DC headers
Transgo shiftkit
Tune
Xxr526
Retint
Professional detail
Black suade headliner
Shift **** and boot
Double din
Strafespeed trunk
But then again my new years resolution is to put less money into my G, well see how that turns out hahahaha
Things done so far:
Clear corners w/ black housing
5/16 spacer
06 projectors
Full interior LED
Got my stock 17s powdercoated (for free )
Debadged
Powdercoated front grill black
BC Coilovers
ART pipes
Shockwave TDXV2
Next years mods:
75k maintenance
Stillen or momentum intake
DC headers
Transgo shiftkit
Tune
Xxr526
Retint
Professional detail
Black suade headliner
Shift **** and boot
Double din
Strafespeed trunk
But then again my new years resolution is to put less money into my G, well see how that turns out hahahaha
#32
Registered User
iTrader: (37)
I am scared to add mine but 6 figures wouldn't really surprise me
This year: please note no mods were planned at all for this year, I was going to tear down the 3.8L and possibly get some machine work done if I had time I was going to reassemble it.
Fully rebuilt and rebalanced 3.8L engine, no F'N around this time everything was checked and double checked right down to bolt stretch.
Project Mu BBK
Wingless trunk
CS style rear bumper
SFR 3:1 tank replacing the two ARC tanks I bought this year
Burnt Ti nismo shift **** to replace TK one
Burnt Ti ARC cooling plate.
Rebuilt tranny.....with a F'ed 5th gear(hard to roll street bikes on the hiway with no 5th )
Polished barrels on wheels (were color matched before)
Got a bit of retune that is still not complete?
An ARC oil cooler still haven't installed it.
Richie strut bar
JDM tail lights
Project Mu lug nuts
JDM double din kit
Forgot to add, also got an Iconic grill to show off the ARC oil cooler
Whiteline compression rod bushings
ARC oil cap
new centre caps for the wheels
and finally I also added an APS oil pan.
old rear shot
new rear shot
painted barrels/ old BBK/old centre caps/old lugs
Polished barrels new centre caps/new BBK with new lugs
Old engine bay
Old engine bay with ARC catch can
Latest engine bay....brutal picture and nothing had been polished/cleaned since the engine install. I am just filling the coolant after engine install in this picture, I should try to get a new picture that does the new set up more justice.
Old shift **** vs new one, the flash kills the purple blue tint to the new Nismo Ti ****
Next year:
Finish tune, get launch control working, traction control, flat shifting ect ect
Possibly a triple plate clutch and a tranny with working 5th gear
Some 18" wheels with Mickey Thompson ET streets
New wing from Slammered-inc
Paint the poor matching rear bumper at the same time as the trunk
Possibly a new front bumper maybe side skirts
Thinking about a 3" exhaust maybe a custom made one
Last edited by Sylvan lake V35; 11-20-2011 at 10:39 PM.
The following users liked this post:
SDGenius (11-20-2011)
#33
I've had my G since March 2011 Here's what I've done so far. Hopefully I can get a few more nice days in before it gets put away for winter.
Polished Upper Plenum
Polished Furookie Intake
Polished Throttle body
JDM Battery Cover
JDM DD Face Plate, JVC Double Din & Steering Wheel Controls
JDM Clear Corners
JL Audio Amps/Sub
20" Wheels
BC Coils
SPC Toe Arms
2 Way Alarm w/ Remote Start
20% Formula One Ceramic Tint
Removed the Wipers (No Rain/Snow Driving for me)
LED Interior Bulb Swap
As far as future mods go. The future is what it is.
Polished Upper Plenum
Polished Furookie Intake
Polished Throttle body
JDM Battery Cover
JDM DD Face Plate, JVC Double Din & Steering Wheel Controls
JDM Clear Corners
JL Audio Amps/Sub
20" Wheels
BC Coils
SPC Toe Arms
2 Way Alarm w/ Remote Start
20% Formula One Ceramic Tint
Removed the Wipers (No Rain/Snow Driving for me)
LED Interior Bulb Swap
As far as future mods go. The future is what it is.
#35
Bought my G in October (65k miles), since then have done
-clear corners
-k/n dropin
-ztube
-5/16 spacer
-spark plugs
-cleaned TB
-cleaned MAF
-grounding kit
-berk hfcs (not done yet, but will be by end of year)
-replaced all fluids
Next year
-paint grill
-rotors and brakes
-interior leds
-transgo shift kit
-coilovers
-exhaust (depending on how I like the HFCs)
-tune
-debadge
-clear corners
-k/n dropin
-ztube
-5/16 spacer
-spark plugs
-cleaned TB
-cleaned MAF
-grounding kit
-berk hfcs (not done yet, but will be by end of year)
-replaced all fluids
Next year
-paint grill
-rotors and brakes
-interior leds
-transgo shift kit
-coilovers
-exhaust (depending on how I like the HFCs)
-tune
-debadge
#36
Fresh paint
K2 original
Kenstyle sides
Carbon oem hood
Strafe carbon speed trunk
Carbon front splitter
Carbon diffuser
Varstoen +12/ with nitto invo rubber
M2 catback
Z1 5/16 spacer
Stillen cai
Tokico struts
Tein stechs
Kinetix front camber arms
Spc rear camber
Full system components,dd 2 amps 12 inch sub
Then all the maintnance new brakes,rotors and new fluids
K2 original
Kenstyle sides
Carbon oem hood
Strafe carbon speed trunk
Carbon front splitter
Carbon diffuser
Varstoen +12/ with nitto invo rubber
M2 catback
Z1 5/16 spacer
Stillen cai
Tokico struts
Tein stechs
Kinetix front camber arms
Spc rear camber
Full system components,dd 2 amps 12 inch sub
Then all the maintnance new brakes,rotors and new fluids
#39
]Well given ive had the car for a little little over a year..
Exterior:
Paint Headlights - 200
Matte black Diffuser painted - 100
Matte black Roof - 150
Lip Kit - 200
All bulbs changed to white LED’s – V-LED’s
Upgraded stock HID’s to 6k– V-LED’s
Converted stock fog light to 6k HID’s – V-LED’s All lights 400 ish
Suspension:
Project kicks Neo Chrome lug nuts - 220
One off Custom; Staggered 20's - Savini SV25's - 6k
bbk - 2k
Stereo: - 1300 ish
Fully Insulated Trunk
Monster Wiring
2x MXT 5601 Amps (600 RMS each) – Custom Painted
2x Alpine Type R Subs (500 RMS each)
Custom Box and Amp Rack
Various accent LEd's
Engine Bay:
NRG Carbon Fiber Hood Damper - 130
NRG Carbon Fiber Strut Bar -200
Carbon Fiber Engine Cover -100
Carbon Fiber Wrap Battery Cover
Nismo Radiator Cap
Nismo Oil Cap
Intake - takada -180
Motordyne 5/16" Spacer -180
Custom Exhaust -450
Someone posted that we should post cost on parts, i went back and added what i remembered off top.. 15k into mods alone.
More pics and details can be found in build thread in sig.
Exterior:
Paint Headlights - 200
Matte black Diffuser painted - 100
Matte black Roof - 150
Lip Kit - 200
All bulbs changed to white LED’s – V-LED’s
Upgraded stock HID’s to 6k– V-LED’s
Converted stock fog light to 6k HID’s – V-LED’s All lights 400 ish
Suspension:
Project kicks Neo Chrome lug nuts - 220
One off Custom; Staggered 20's - Savini SV25's - 6k
bbk - 2k
Stereo: - 1300 ish
Fully Insulated Trunk
Monster Wiring
2x MXT 5601 Amps (600 RMS each) – Custom Painted
2x Alpine Type R Subs (500 RMS each)
Custom Box and Amp Rack
Various accent LEd's
Engine Bay:
NRG Carbon Fiber Hood Damper - 130
NRG Carbon Fiber Strut Bar -200
Carbon Fiber Engine Cover -100
Carbon Fiber Wrap Battery Cover
Nismo Radiator Cap
Nismo Oil Cap
Intake - takada -180
Motordyne 5/16" Spacer -180
Custom Exhaust -450
Someone posted that we should post cost on parts, i went back and added what i remembered off top.. 15k into mods alone.
More pics and details can be found in build thread in sig.
#40
$15k in mods. Incredible. You could buy ANOTHER 6MT coupe for that. Or you could have put that into a better car. I know you guys love these dress up mods. I just don't get it. I guess I'm more of a function over form kind of guy. You pimpers seem to be the exact opposite. Nothing wrong with it. I just don't swing that way.
#41
ill Sedan
iTrader: (87)
Looking back at this year I've done way too freakin' much!! I wasn't even planning on doing much this year just engine bay stuff...LOL
19" SSR SP1s (sold Nismo LMGT4s)
Tanabe Y back exhaust (sold HKS rear muffler)
Tanabe Y pipe
Labree Test pipes (sold already)
Motordyne ART pipes
Motordyne Sway bars (sold Stillens)
Powergrid endlinks
Polished RareJDM Aluminum Underpanel
JDM tail lights
ARC STB polished and burned
ARC cooling panel polished
Added 2nd set of R40 lugs (when I was running the Nismo LMGT4s - 10 lugs FTW!)
Chrome lower covers on timing cover
Gates racing belts (blue)
More polished bolts, AN fitings and braided hoses in the engine bay
Polished bolts in my BBK
Rotor hats painted black
Polished alternator housing
Polished PS pump
Chrome PS pump pulley
UR idler pulley polished
UR alternator pulley polished
Welded/chromed cooling pipes
Chromed brackets in engine bay
Polished header heat shields
Koyo Radiator
Forged Racing slim fans
GT spec rear lower brace (removed after I added more camber, it wouldn't fit given the elongated toe bolt holes)
Chrome hood latch
Earl's Transmission Cooler w/ custom RRDYE bracket, braided hoses and AN fittings
Still have a few more things in work that will be done in a couple of weeks.
19" SSR SP1s (sold Nismo LMGT4s)
Tanabe Y back exhaust (sold HKS rear muffler)
Tanabe Y pipe
Labree Test pipes (sold already)
Motordyne ART pipes
Motordyne Sway bars (sold Stillens)
Powergrid endlinks
Polished RareJDM Aluminum Underpanel
JDM tail lights
ARC STB polished and burned
ARC cooling panel polished
Added 2nd set of R40 lugs (when I was running the Nismo LMGT4s - 10 lugs FTW!)
Chrome lower covers on timing cover
Gates racing belts (blue)
More polished bolts, AN fitings and braided hoses in the engine bay
Polished bolts in my BBK
Rotor hats painted black
Polished alternator housing
Polished PS pump
Chrome PS pump pulley
UR idler pulley polished
UR alternator pulley polished
Welded/chromed cooling pipes
Chromed brackets in engine bay
Polished header heat shields
Koyo Radiator
Forged Racing slim fans
GT spec rear lower brace (removed after I added more camber, it wouldn't fit given the elongated toe bolt holes)
Chrome hood latch
Earl's Transmission Cooler w/ custom RRDYE bracket, braided hoses and AN fittings
Still have a few more things in work that will be done in a couple of weeks.
Shaved and painted core support
BAUSauto Custom Quad projectors
ARC cooling panel burned
#42
For 2011
SxExCx Polished Power Steering Tank
SxExCx Polished Coolant overflow tank
Ap Racing Front 6 piston BBK custom Powder coated
Ichiba 15mm F and 20mm R V1 spacers
Cosworth Polished Plenum
Arc V2 Catch Can (Sold)
Painted Valve Covers
Chromed and Polished Engine bay Brackets
Chromed Door lock Brackets
Cosworth Fuel Rails
Full Wire Tuck
Custom Polished and Burned Arc STB
Custom Polished and Burned ARC cooling plate
Venair Radiator hoses
Custom ARC Oil Cap
Furookie Intake
Polished Throttle Body
Earls Stainless Hose and Clamps
Polished T-bolt Clamps
Polished Timing Cover
Custom one off Rear Bumper
Replaced all engine bay bolts
Polished Lower Collector
Painted Pulleys
Arc Radiator Cap
I know there is more.. i will edit and add as i remember..!
SxExCx Polished Power Steering Tank
SxExCx Polished Coolant overflow tank
Ap Racing Front 6 piston BBK custom Powder coated
Ichiba 15mm F and 20mm R V1 spacers
Cosworth Polished Plenum
Arc V2 Catch Can (Sold)
Painted Valve Covers
Chromed and Polished Engine bay Brackets
Chromed Door lock Brackets
Cosworth Fuel Rails
Full Wire Tuck
Custom Polished and Burned Arc STB
Custom Polished and Burned ARC cooling plate
Venair Radiator hoses
Custom ARC Oil Cap
Furookie Intake
Polished Throttle Body
Earls Stainless Hose and Clamps
Polished T-bolt Clamps
Polished Timing Cover
Custom one off Rear Bumper
Replaced all engine bay bolts
Polished Lower Collector
Painted Pulleys
Arc Radiator Cap
I know there is more.. i will edit and add as i remember..!
#43
Well owned mine for about a month:
What it came with:
Tein Springs
Stillen Intake
What I did in a month:
LED conversion
HID's (Low beam, Fog)
Trunk Lip Spoiler
350z Winter wheels
Painted 18's black, then about 2 weeks later put them back
Blacked out grille
Debadge Trunk
And tomorrow I am picking up stillen sway bars:
Looking forward to modding next year!
What it came with:
Tein Springs
Stillen Intake
What I did in a month:
LED conversion
HID's (Low beam, Fog)
Trunk Lip Spoiler
350z Winter wheels
Painted 18's black, then about 2 weeks later put them back
Blacked out grille
Debadge Trunk
And tomorrow I am picking up stillen sway bars:
Looking forward to modding next year!
Last edited by Songle6MT; 12-22-2011 at 10:39 PM.
#44
Banned
iTrader: (8)
Engine
CP 8.5:1 Pistons
Pauter Rods
ACL Bearings
L19 Headstuds
HKS Headgasket
ARP Mainstuds
JWT C2 Cams
JWT Spring/Retainers
Mild Headwork
Z1 Adjustable Poly Motor Mounts
Z1 High Clearance Motor Mount Brackets
Z1 Upgraded Wastegate actuators
APS Premium BB Twin Turbo Kit w/Z1 upgraded Housings
APS Oil Pan
Z1 Silicone Oil Drain Hoses for APS TT
Larger IC piping
Z1 Couplers and T-Bolt Clamps
Custom HR style Cooling system
Idler/tenstioner pulley delete
Wire Tuck
PC'ed Timing cover
APS 880cc injectors
Twin Walbro 255s in APS housing
APS Fuel Rails and Regulators
New APS Kit metal Gaskets
APS 3" Dual Exhaust
Z1 Motorsports Oil Cooler Kit
Z1 Osiris Dyno tune
ARC Catch Can w/ SS lines
ARC Oil Cap
Z1 Hose kit
HKS BOV
OE 1 Step Colder Plugs
Custom Direct Port Meth Injection
Zex 100shot
Exterior
Seibon CF Hood
Modded 06 Projectors
Custom LED Clear Corners
Zspeed Undershroud
Interior
Corbeau CR-1 Seats
Defi BF link Box
Defi Boost
Defi Water Temp
Defi Fuel Pressure
Autometer Gauge Pod
2 Innovate Widebands
AIT Dual Gauge Pod
Nissan Aluminum Sport Pedals
Nismo 380RS Gas Pedal
Drivetrain
Carbonetic Triple Disk Clutch
3.3VLSD
Injected Diff Brace
Custom Solid Rear Diff Mount
Nismo Diff Cover
CD009 Trans
Suspension
Engery Suspension Bushings
2 sets of rear tires
Carbotech X8 Pads
And yes these were only the mods done this year, Its unbelievable to think
3 years ago: Bone stock w/ Volks
2 years ago: NA w/ boltons/tune 265rwhp/250ft-lb
1 Year ago: Stock Block TT 510rwhp/466ft-lb
Now: Built Block TT: 633rwhp/664ft-lb w/o spray
I think I have a problem....
CP 8.5:1 Pistons
Pauter Rods
ACL Bearings
L19 Headstuds
HKS Headgasket
ARP Mainstuds
JWT C2 Cams
JWT Spring/Retainers
Mild Headwork
Z1 Adjustable Poly Motor Mounts
Z1 High Clearance Motor Mount Brackets
Z1 Upgraded Wastegate actuators
APS Premium BB Twin Turbo Kit w/Z1 upgraded Housings
APS Oil Pan
Z1 Silicone Oil Drain Hoses for APS TT
Larger IC piping
Z1 Couplers and T-Bolt Clamps
Custom HR style Cooling system
Idler/tenstioner pulley delete
Wire Tuck
PC'ed Timing cover
APS 880cc injectors
Twin Walbro 255s in APS housing
APS Fuel Rails and Regulators
New APS Kit metal Gaskets
APS 3" Dual Exhaust
Z1 Motorsports Oil Cooler Kit
Z1 Osiris Dyno tune
ARC Catch Can w/ SS lines
ARC Oil Cap
Z1 Hose kit
HKS BOV
OE 1 Step Colder Plugs
Custom Direct Port Meth Injection
Zex 100shot
Exterior
Seibon CF Hood
Modded 06 Projectors
Custom LED Clear Corners
Zspeed Undershroud
Interior
Corbeau CR-1 Seats
Defi BF link Box
Defi Boost
Defi Water Temp
Defi Fuel Pressure
Autometer Gauge Pod
2 Innovate Widebands
AIT Dual Gauge Pod
Nissan Aluminum Sport Pedals
Nismo 380RS Gas Pedal
Drivetrain
Carbonetic Triple Disk Clutch
3.3VLSD
Injected Diff Brace
Custom Solid Rear Diff Mount
Nismo Diff Cover
CD009 Trans
Suspension
Engery Suspension Bushings
2 sets of rear tires
Carbotech X8 Pads
And yes these were only the mods done this year, Its unbelievable to think
3 years ago: Bone stock w/ Volks
2 years ago: NA w/ boltons/tune 265rwhp/250ft-lb
1 Year ago: Stock Block TT 510rwhp/466ft-lb
Now: Built Block TT: 633rwhp/664ft-lb w/o spray
I think I have a problem....
Last edited by Z1Motorsports; 12-22-2011 at 07:31 PM.
The following users liked this post:
CandlestickPark (12-22-2011)
#45
I'm thorougly impressed by some of your lists.
Owned my '05 G Sedan since August 2011.
Mods so far:
Z Tube
JWT Pop Charger
18'' Staggered G37s rims
Replica clear corners
Interior LED bulbs
6000k HID bulbs
Suntek Carbon Window Film (35% front, 18% rear)
Razo A/T Quick Shift ****
Debadged "I N F I N I T I"
For 2012:
5/16'' Plenum Spacer
Tein S Techs
Emblemless black front grill
Front lip
GPS mounted in cubby
Don't see much modding past that. Trying to save for other things in life makes it difficult to mod as much as you guys!
Owned my '05 G Sedan since August 2011.
Mods so far:
Z Tube
JWT Pop Charger
18'' Staggered G37s rims
Replica clear corners
Interior LED bulbs
6000k HID bulbs
Suntek Carbon Window Film (35% front, 18% rear)
Razo A/T Quick Shift ****
Debadged "I N F I N I T I"
For 2012:
5/16'' Plenum Spacer
Tein S Techs
Emblemless black front grill
Front lip
GPS mounted in cubby
Don't see much modding past that. Trying to save for other things in life makes it difficult to mod as much as you guys!