Asking price is $16K firm. So why so cheap? On Friday night I spun the tail and went up on a curb. I was going about 40 mph when I punched it and spun the tail. The impact with the curb bent both passenger side wheels, popped both tires, and knocked the alignment off as there is a slight pull to the right.

Additionally, there is very minor cosmetic damage to the Top Secret front bumper on the lower right front corner. The fiberglass cracked although the structure of the bumper is not damaged. It can be repaired; however, it would probably be easier and more cost effective to just buy a new bumper. A new Top Secret bumper sells for about $900.

I have not been on the boards much lately so I don't know what Volks are going for but you should be able to purchase two new GT-7s and four new PS2 for $2,800. Add in the $900 for the bumper and say $300 to have a body shop install and paint it and you can be good as new for $4,000 on top of the purchase price. I've seen what other similarly modded cars on this forum have been priced for and nobody comes close to $20K. I just spent $20K last July for all the work GTM did. I simply do not want to deal with this car anymore. I have dumped too much money in the car and I refuse to spend another dime on it. My loss is your gain.

The car is in good condition. It has the normal wear and tear of a 5 year old vehicle. The frame has 53K miles and I have put 4K on the new motor. It has a clean title and it is paid off. The title is in my possession.

I am NOT interested in parting the car out, nor will I ever change my mind about parting it out. I don't have any of the OEM parts. Additionally, I am not paying for the labor to have everything removed. Finally, I don't have the time needed to part it out, find buyers, and ship them the parts. So please do not post "if you decided to part out the car, I am interested in" comments in this thread.

I will ship the car at the buyer’s expense.

Engine:
-GTM short block (wiseco/pauter)
-GTM Stage 1 heads
-GTM 14mm head studs
-GTM Stage 3 turbo cams (288's)
-GTM 14" Dual fan kit and shroud
-HKS Headgaskets
-Crawford Intake manifold
-PE Radiator
-Greddy Catch Can


Engine Management:
-HKS FCon Vpro with harness and sensors
-HKS A/F Knock Amp
-HKS EVC VI Boost Controller
-HKS FCon Navigator
-GTM Spec ECU Reflash
-DEFI BF-Series gauges (water, boost, oil pressure)
-Defi link controller

Turbo:
-Greddy Twin Turbo
-2 Greddy Type S blow off

Fuel System:
-Aeromotive regulator
-AAM Stage 1 and 2 fuel system
-HKS 1000cc injectors
-Walbro 255 in-tank pump

Exhaust:
-Custom 3" true dual exhaust
-Custom 3" test pipes
-HKS mufflers
-SGP open dumps

Drivetrain:
-ATS Twin Carbon Clutch
-3.5 final drive (from AT G35)

Suspension:
-Tein Flex with EDFC
-Still sway bars front and back
- Volk GT-7 Diamond Black 19 x 9.5 30+ front 19 x 10.5 24+ rear
- Michelin PS2 265/35 front 295/30 rear

Other:
-Top Secret body kit (front, side, rear)
-Clifford Matrix alarm with remote start
-Passport SR7 plus laser shifter radar

picks and dyno


http://my350z.com/forum/shop-builds/...head-stud.html


I am currently out of town, but I have asked my wife to snap some pictures of the damage on the front bumper and the wheels. I will post them as soon as she emails them to me.

 

Wow, that is a GREAT price for your car, good luck with the sale, I wish I had the money!

 

pictures of the bent wheels?

 

wow insane deal for a car with so much invested alot of money lost selling at that price g/L with the sale

 

great deal for someone with a set of wheels laying around

 

damn wish u were closer to maryland!

 

how about a trade ?! lmao

 

yea i trade u my 03 dg coupe and $2k, just got new motor in it... sitting at forged right now

 

When will you be back from out of town?

 

I arrive back in Miami Friday morning.

 

Here are the pics of the damage to the front bumper and rims. I imagine there isn't any damage to the suspension as I was not going that fast when impact with the curb occurred. The car drives fine other than the slight pull to the right. I borrowed a spare tire from a friend and drove it home with two spares.

I just purchased a set of OEM wheels on ebay last night. I will take the car to get aligned once I recieve them.

Here are some pics of the damage. The wife didn't take the best pics. I am out of town until Friday. I will pull the car out of the garage, clean her up, and take some better pics. Hopefully, I'll receive the OEM wheels by then so I can take the car to get aligned either Friday afternoon or Saturday morning.

At 550whp I have not have any slipping issues with the clutch. From my experience the ATS clutch slips when cold, but I don't run it hard without warming up the clutch so I haven't had any issues. I can't say what will happen on the high octane map (600whp) because I have never used it.

 

not interested in a trade at this time, but thanks for the offer. I am going to cash out my 401K and with what I have in cash as well as the proceeds from this sale, I plan to pick up a couple of foreclosures. The prices are so low you can make a 15-20% ROI by renting them out.

 

wow if your in socal ....

 

BOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!! ! Haha, I hope you sell it, one of the guys from my local forum is looking into your car, I hope you sell it man, too bad to get rid of such a beautiful car! What are your plans for the future with your next car?

 

Let me know if you need a truck to do the work on all those foreclosures! I'd be happy to trade you.