FS: 2004 G35 Coupe APR Widebody
Thread Starter
|
Banned
Joined: Nov 2012
Posts: 41
Likes: 1
N/A
2004 G35 Coupe APR Widebody
My 2004 G35 Coupe APR Widebody is for sale. Yes, this used to be Kris's old G35 for whoever is wondering. Featured on Import Tuner Magazine & Cover
It's currently my daily driver and I am located in Colorado. The G35 was wrapped in California, and right after it finished getting wrapped I had to go straight back to work in Colorado not allowing the wrap to fully settle so it needs some touch up which I will get fixed very soon. Driving through Flagstaff in a blizzard at 6 degrees F didn't help hahah.
No accidents, clean title
I do have a loan on it though
Bads:
-Crack on passenger fender side
-x2 Little bulges of fiberglass on front bumper
-Gas cap is not smooth due to the bondo not curing underneath the old paint
-x2 bondo bubbles from bodywork underneath the old paint next to the gas cap
-Front bumper needs a re-wrap and I'll have it done including the side skirts
-Minor bubbles from the cold weather, I'll get that fixed
-Small pea size crack in front windshield
-Airbag & Seatbelt light are always on
Good:
-Engine pulls strong, no issues
-Goes into every gear with no issues, no grinds
-Low miles for 2004
-Everything is fully functional
-Head Turner
Exterior:
-APR Widebody wrapped in 3M 1080 Matte Grey Aluminum
-Roof & "Diffuser" design wrapped in 3M 1080 Carbon Fiber
-Hikkatadori Carbon Fiber Hood also wrapped in Matte Grey Alumnium with Carbon Fiber Vents, (Does not come with mesh vents or rain guard, although in the near future I will install mesh vents)
-Mastergrade V2 Carbon Fiber Trunk (Does not have trunk struts)
-Tinted windows (% Unknown)
-2006 Projector Headlights with black painted housing, 5000k HID, Yellow Fogs
-JDM Taillight (The button does not work since the 2004 didn't have that feature)
-DPE S20: 20x11/20x13 waiting to be powdercoated wrapped with Continental Extreme Contacts with TPMS (Plenty of tread left)
-Muteki Black Chrome Extended Lug Nuts (4 weeks old)
-G37 Stock Calipers painted in black
-H&R 15mm Front Spacers (2 weeks old)
Suspension:
-UAS Airbags with Tokico Shocks
-Airlift V2 Management System (1/4 lines inside old 1/2 lines for added protection) (2 weeks old)
-3 Gallon Black Aluminum Air Tank (2 weeks old)
-x1 380c VIAIR Compressor (2 weeks old)
Engine/Exhaust/Performance:
-Takeda Short Ram Intake (2 weeks old)
-Z1 Motorsports Test Pipe with Defouler for O2 Sensors (No CEL or SEL) (1 week old)
-Also, I have available are Crawford High Flow Cats
-HKS Hi-Power TI True Dual Exhaust
-ACT Stage 2 Clutch
Interior: (Wrapped in 3M 1080 Carbon fiber, it's not the best but looks good still)
-Pioneer AVIC D-2 with a monster AUX input (Maps are outdated though)
-x2 Recaro Speed Seats in Black Avus (Driver side has butt wear, Passenger looks great)
-Personal Leather Shift Boot
-Works Bell Short Hub
-The Works Bell Rapfix QRS & Personal Steering Wheel will not be for sale so I will probably through NRG stuff on there
-Nismo Titanium Shift ****
-JDM Center Dash
Through me some offers if you're interested!
(714) 856-8610 Call/Text: Max
PICTURES HERE
http://s289.beta.photobucket.com/use...ary/G35%20Sale
It's currently my daily driver and I am located in Colorado. The G35 was wrapped in California, and right after it finished getting wrapped I had to go straight back to work in Colorado not allowing the wrap to fully settle so it needs some touch up which I will get fixed very soon. Driving through Flagstaff in a blizzard at 6 degrees F didn't help hahah.
No accidents, clean title
I do have a loan on it though
Bads:
-Crack on passenger fender side
-x2 Little bulges of fiberglass on front bumper
-Gas cap is not smooth due to the bondo not curing underneath the old paint
-x2 bondo bubbles from bodywork underneath the old paint next to the gas cap
-Front bumper needs a re-wrap and I'll have it done including the side skirts
-Minor bubbles from the cold weather, I'll get that fixed
-Small pea size crack in front windshield
-Airbag & Seatbelt light are always on
Good:
-Engine pulls strong, no issues
-Goes into every gear with no issues, no grinds
-Low miles for 2004
-Everything is fully functional
-Head Turner
Exterior:
-APR Widebody wrapped in 3M 1080 Matte Grey Aluminum
-Roof & "Diffuser" design wrapped in 3M 1080 Carbon Fiber
-Hikkatadori Carbon Fiber Hood also wrapped in Matte Grey Alumnium with Carbon Fiber Vents, (Does not come with mesh vents or rain guard, although in the near future I will install mesh vents)
-Mastergrade V2 Carbon Fiber Trunk (Does not have trunk struts)
-Tinted windows (% Unknown)
-2006 Projector Headlights with black painted housing, 5000k HID, Yellow Fogs
-JDM Taillight (The button does not work since the 2004 didn't have that feature)
-DPE S20: 20x11/20x13 waiting to be powdercoated wrapped with Continental Extreme Contacts with TPMS (Plenty of tread left)
-Muteki Black Chrome Extended Lug Nuts (4 weeks old)
-G37 Stock Calipers painted in black
-H&R 15mm Front Spacers (2 weeks old)
Suspension:
-UAS Airbags with Tokico Shocks
-Airlift V2 Management System (1/4 lines inside old 1/2 lines for added protection) (2 weeks old)
-3 Gallon Black Aluminum Air Tank (2 weeks old)
-x1 380c VIAIR Compressor (2 weeks old)
Engine/Exhaust/Performance:
-Takeda Short Ram Intake (2 weeks old)
-Z1 Motorsports Test Pipe with Defouler for O2 Sensors (No CEL or SEL) (1 week old)
-Also, I have available are Crawford High Flow Cats
-HKS Hi-Power TI True Dual Exhaust
-ACT Stage 2 Clutch
Interior: (Wrapped in 3M 1080 Carbon fiber, it's not the best but looks good still)
-Pioneer AVIC D-2 with a monster AUX input (Maps are outdated though)
-x2 Recaro Speed Seats in Black Avus (Driver side has butt wear, Passenger looks great)
-Personal Leather Shift Boot
-Works Bell Short Hub
-The Works Bell Rapfix QRS & Personal Steering Wheel will not be for sale so I will probably through NRG stuff on there
-Nismo Titanium Shift ****
-JDM Center Dash
Through me some offers if you're interested!
(714) 856-8610 Call/Text: Max
PICTURES HERE
http://s289.beta.photobucket.com/use...ary/G35%20Sale
Last edited by RA051924; Mar 11, 2013 at 11:38 PM.
Trending Topics
Thread Starter
|
Banned
Joined: Nov 2012
Posts: 41
Likes: 1
N/A
Thanks!
So for the bindi imperfections, it wasn't noticeable with the old paint until I wrapped it in matte. Shows everything haha Ill take a picture later and post it, it's all in one area. The right quarter panel, 2 bondo bubbles and bondo bubbles on the outer edge of the gas lid.
Also, on the left side of the skirt: a piece fell off since it was wrapped in multiple pieces. I plan on having both sides getting re-wrapped including the front bumper. It got pretty beat up from driving from CA to CO. The right fender has crack on the fender well, and the front bumper has 2 little bulges from the fiberglass being cracked. Ill take pictures later!
So for the bindi imperfections, it wasn't noticeable with the old paint until I wrapped it in matte. Shows everything haha Ill take a picture later and post it, it's all in one area. The right quarter panel, 2 bondo bubbles and bondo bubbles on the outer edge of the gas lid.
Also, on the left side of the skirt: a piece fell off since it was wrapped in multiple pieces. I plan on having both sides getting re-wrapped including the front bumper. It got pretty beat up from driving from CA to CO. The right fender has crack on the fender well, and the front bumper has 2 little bulges from the fiberglass being cracked. Ill take pictures later!
Thread
Thread Starter
Forum
Replies
Last Post
vmcarbuyer
Buying, Selling & Leasing Discussion
9
Oct 12, 2019 12:42 PM
