Do you have a boost controller and/ or using race gas? I think almost 10psi is kind of pushing it on stock internals that turbo is huge. Good luck and have fun with it I plan on having some fun when I get my car back.

 

Do you have any other mods besides the ST?

 

I beleive a C6 vette is the stock vette not the Z06 everyone know a Z06 is 500 hps, I beat the regular old and new vette... Thanks for the comment Archangel...Dsskyline turbo looks great... and yea Goran is pushing about 550-600 that with forged rods and pistons he's still working on getting faster, which the car in my opioion is really fast, sick car, I love it... The only mods I have on my car is the Turbo and ACT clutch and Zetronix gauge no turbo boost contorler yet, and I'm just running on 93 octane more to come soon still very picky on what wheels to put I want the Davins but in the East Cost having expensive rims makes no sense they will get damaged by the roads here...

 

What does this Eternal Motor Sports turbo kit use for controlling fueling and timing?

 

A pre-programmed unichip.

 

Here is more info on the kit.

Designed for 2003 –Up Infiniti G35 and M35. *Bolts directly on to the stock VQ 3.5 L engine. *No additional modifications.*
*Uses stock manifolds, cutting down on installation time. *Garrett GT35-R dual ball bearing water cooled turbo and includes:
*External TiAl 44mm waste-gate. *3” down pipe that connects to a high flow catalytic converter that mounts to stock muffler.
*Stainless steel heat shield. *440cc fuel injectors. *Fuel pressure regulator and Walbro High Flow Fuel Pump with fuel return.
*Air to air intercooler. *Ceramic Heat Coated Stainless Steel piping (available in polished look, flat black, or red finishes).
*All required hardware and installation manual is included. *Stainless steel braided Teflon water and oil hoses.
*Pre-programmed piggy-back UniChip fuel management that interfaces with stock ECU.
*Performance from stock 3.5 L engine at 8.94psi is 392whp and 415 ft lbs torque.
*Smog compliant in most states with standard boost. Check your local laws prior to purchase.
*Boost Capabilities up to 25 PSI with internal engine modifications.
*Some A/C lines are replaced and or relocated. Everything needed for installation is included in the kit.

 

so does that mean they obtained the CARB number for this kit??

 

how much does this kit cost.

 

Retail the kit costs $6500, and Eternal Motor Sports installed for me, installation cost me a grand...

 

hello boys and girls. it's funny you guys are talking about this kit. i was the original of this kit. i have an '03 G356MT and the numbers posted were on my car 383hp/416tq. i posted pics and dynos a long time ago.


http://www.imagestation.com/album/pi...?id=2121101314

 

No, but it can pass smog because it is using a hi flow cat. The only thing you have to worry about is the visual which you can pay someone to look the other way.

 

Nice.

I have not seen this kit before. Props for another ST kit!

 

You are the reason I got mine I just wanted something different plus it's made just for our cars. I should have my car back in the next few weeks with a built motor. The design has changed a little from yours, but it makes the same power.

 

I know I'm the only west coast car with this kit as far as I know.

 

somebody is rich.