///m3 style!!!!!!!!!
Originally Posted by KAROG35
hahahha so u didnt even do the holes yet????
Thread Starter
|
Registered User
Joined: Sep 2006
Posts: 270
Likes: 0
na u know the black thing the plug.. under the plug there is like 4 lil metals that connect to the whole thing right... connect the leds to those...
Originally Posted by Casetay
haha nah I never made it that far. I have another question for when my new mirror comes in. Do you connect the leds on the other side of the circuit board? Other side as in the reverse side of my pictures i posted?
^haha DANGIT! I was on the right track.but it's more like 8 lil wires haha it's all good. What did you use to connect them? Did you solder them to it? And my LEDs are registered for 10-14 volt range. Is it not going to blow the bulbs?
Thread Starter
|
Registered User
Joined: Sep 2006
Posts: 270
Likes: 0
no i dont think it will blow but i connect my with two lil wires and thats it.. if u have any questions feel free to ask
Originally Posted by Casetay
^haha DANGIT! I was on the right track.but it's more like 8 lil wires haha it's all good. What did you use to connect them? Did you solder them to it? And my LEDs are registered for 10-14 volt range. Is it not going to blow the bulbs?
if / when i get my car back ill do a diy for this. - is easy to find its the + that we need. never use a test light. aways use a dmm!!!
what leds did you get? are you puttin a resistor on them as well??
what leds did you get? are you puttin a resistor on them as well??
alright
the wire coming into the honelink mirror that carries the +12 is the black/pink wire. the ground is the black wire.
wire diagram can be found here on page 57
http://www.g35frenzy.com/downloads/2...anual/I/gw.pdf
the wire coming into the honelink mirror that carries the +12 is the black/pink wire. the ground is the black wire.
wire diagram can be found here on page 57
http://www.g35frenzy.com/downloads/2...anual/I/gw.pdf
just find the pin that the black pink wire connects to on the circuit board and grab your power there, and do the same for the ground wire
from the diagram you can see that you can have them on all the time or only when the car is on. i would go with only when the car is on. too bad there isnt and illum wire up there so that they woudl only come on when the lights are turned on.
from the diagram you can see that you can have them on all the time or only when the car is on. i would go with only when the car is on. too bad there isnt and illum wire up there so that they woudl only come on when the lights are turned on.
Originally Posted by SFLG35
if / when i get my car back ill do a diy for this. - is easy to find its the + that we need. never use a test light. aways use a dmm!!!
what leds did you get? are you puttin a resistor on them as well??
what leds did you get? are you puttin a resistor on them as well??
http://www.superbrightleds.com/hobby.htm
has anyone done this with a double din kit??
im thinking about doing it but i think that it will cause a lot of glare onteh screen at night time.
has anyone else dont this yet at all?
im thinking about doing it but i think that it will cause a lot of glare onteh screen at night time.
has anyone else dont this yet at all?
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
Dec 18, 2018 05:43 PM
Extreme Dimensions
Southern California
3
Oct 19, 2015 06:28 PM
