Since the bumper was predrilled, I had to drill the holes myself... being the nutjob that I am, I accidently loosened up the hold a bit much and my clear corner on the driver side doesn't catch well at all (meaning any little bump will knock it out having it hang from the clearcorner bulb wire).

Any advice for me now? Obviously I can't undo what I've done... ?

THANKS IN ADVANCE!

 

I guess you're going to have to secure it from the inside kind of like what people are doing for anti-theft. Basically put a piece of wire from inside the wheelwell into the clip of the clear corner. I think you have to drill a hole though (since you're a nutjob, shouldn't be any prob). That should lock it in place.

 

try double sided tape.

 

Here's the thread for the anti-theft. It looks like you may not have to drill the hole and just stick the pin (or larger wire) into the clip.

https://g35driver.com/forums/faq-diy/15797-anti-theft-clear-coupe-corners.html

 

Thank you guys, I'll give all your advices a try!

 

super glue and/or duct tape fixed my marriage! I'm sure it can fix your clear corners.

 

maybe ask G FORCE 06..he is very handy when it comes to this stuff and he also customizes alot so he should ahve a good answer

Joe