New Member Saying Hi!
#17
09-09-2007, 12:11 PM
Kinda weird not fighting with the steering wheel at full throttle huh... 
. I don't miss torque steer a bit.
The mods that work on the G35 are different than the Nissan engines. A mrev2 with spacer will produce the most NA power out of the rev-ups. Then headers and a exhaust may add a little but won't really do much without a ECU reflash or piggyback. Some may say its just cheaper and more effective to go FI if you want more than 30hp.
. I don't miss torque steer a bit. The mods that work on the G35 are different than the Nissan engines. A mrev2 with spacer will produce the most NA power out of the rev-ups. Then headers and a exhaust may add a little but won't really do much without a ECU reflash or piggyback. Some may say its just cheaper and more effective to go FI if you want more than 30hp.
#18
09-10-2007, 12:23 AM
Originally Posted by d_pak
Am I missing a cover for the brake fluid side of the engine?
You need a JDM batery cover.
https://g35driver.com/forums/showthr...m+batery+cover
#20
09-10-2007, 08:00 PM
Just ordered the following:
- 40% Tint all around including moonroof performed this afternoon.
- JDM RHD Battery Cover (WOW my car will have 2 batteries
)
- Nismo High Pressure Radiator Cap (forgot to take mine out of my Altima SE-R, dang)
- Blizzak's for Winter: 2 x 225/45/18 & 2 x 225/50/18
- Looking for a decent place to order a Z-tube and POP Charger combo???
Anyone got a cure for the common mod bug?
- 40% Tint all around including moonroof performed this afternoon.
- JDM RHD Battery Cover (WOW my car will have 2 batteries
)- Nismo High Pressure Radiator Cap (forgot to take mine out of my Altima SE-R, dang)
- Blizzak's for Winter: 2 x 225/45/18 & 2 x 225/50/18
- Looking for a decent place to order a Z-tube and POP Charger combo???
Anyone got a cure for the common mod bug?
#24
09-10-2007, 10:41 PM
Originally Posted by d_pak
- Looking for a decent place to order a Z-tube and POP Charger combo???
Anyone got a cure for the common mod bug?
Anyone got a cure for the common mod bug?
#26
09-11-2007, 07:35 PM
#27
09-11-2007, 08:42 PM
MSRP was $40,990 (not including delivery, etc), after discount it was then taxes, etc it was $34,613.30 out the door, but I did use VPP (Nissan Vehicle Purchase Program) because I work for a vendor who makes about 50% of the components for Nissan/Infiniti.
Anyways, I just ordered a z-tube with jwt pop charger, splash guards, and an ARC strut bar (apparent this is only one that will work without removing plastic engine cover)
Okay, I am done with mods, for now. Don't want the mods to lead to a divorce, or worse yet, more shoes and purses.
Anyways, I just ordered a z-tube with jwt pop charger, splash guards, and an ARC strut bar (apparent this is only one that will work without removing plastic engine cover)
Okay, I am done with mods, for now. Don't want the mods to lead to a divorce, or worse yet, more shoes and purses.
#28
09-11-2007, 10:05 PM
Originally Posted by d_pak
MSRP was $40,990 (not including delivery, etc), after discount it was then taxes, etc it was $34,613.30 out the door, but I did use VPP (Nissan Vehicle Purchase Program) because I work for a vendor who makes about 50% of the components for Nissan/Infiniti.
Anyways, I just ordered a z-tube with jwt pop charger, splash guards, and an ARC strut bar (apparent this is only one that will work without removing plastic engine cover)
Okay, I am done with mods, for now. Don't want the mods to lead to a divorce, or worse yet, more shoes and purses.
Anyways, I just ordered a z-tube with jwt pop charger, splash guards, and an ARC strut bar (apparent this is only one that will work without removing plastic engine cover)
Okay, I am done with mods, for now. Don't want the mods to lead to a divorce, or worse yet, more shoes and purses.
Thread
Thread Starter
Forum
Replies
Last Post