Anyone tried removing the tow hook cover?
#1
Joined: Dec 2003
Posts: 3,050
Likes: 12
From: western New Jersey
Anyone tried removing the tow hook cover?
I need to install my front license plate temporarily to go to inspection.
How is the tow hook cover removed? I tried lifting it up with a screwdriver in the slot provided, but all it did was put a nick in the paint......
Has anyone had any experience in removing the cover successfully?
I had my bumper repainted last summer, and I hope its not going to chip off any paint or damage the bumper.....It seems like its really secure on the bumper...............
HELP!!!!!!!!
How is the tow hook cover removed? I tried lifting it up with a screwdriver in the slot provided, but all it did was put a nick in the paint......
Has anyone had any experience in removing the cover successfully?
I had my bumper repainted last summer, and I hope its not going to chip off any paint or damage the bumper.....It seems like its really secure on the bumper...............
HELP!!!!!!!!
#4
#5
Registered User
iTrader: (10)
Joined: Jul 2006
Posts: 3,942
Likes: 7
From: PNW in Washington
6MT Coupe
Originally Posted by LjN_728
Use a smaller screwdriver. Note that one of the four corners has an arrow type of attachment that keeps the cover from falling off. You'll have to squeeze the tips together and pull it out.
I got this bad feeling they painted his bumper with cover still on.
Guess exacto knife to cut paint around cover, then touch up paint afterwards.
#6
Joined: Dec 2003
Posts: 3,050
Likes: 12
From: western New Jersey
Thanks everyone for your fast responses....
Well, I finally did get the cover off.....It was really on the bumper sooo tight.
I actually left a small indentation in the slot area from pressing up so hard to remove the back tab.....I'm not happy, but at least I did it!
They did remove the cover when they repainted my bumper.....the cover was just on really tight....
I will take some pics and post them on how I will mount the OEM bracket without drilling holes....I was posted a while back, but the pics are not up anymore....
This will hopefully save somebody if they need to put a plate on temporarily for a "fix it" ticket/inspection etc....
Thanks again
Well, I finally did get the cover off.....It was really on the bumper sooo tight.
I actually left a small indentation in the slot area from pressing up so hard to remove the back tab.....I'm not happy, but at least I did it!
They did remove the cover when they repainted my bumper.....the cover was just on really tight....
I will take some pics and post them on how I will mount the OEM bracket without drilling holes....I was posted a while back, but the pics are not up anymore....
This will hopefully save somebody if they need to put a plate on temporarily for a "fix it" ticket/inspection etc....
Thanks again
Thread
Thread Starter
Forum
Replies
Last Post
Freeman186
Engine, Drivetrain & Forced-Induction
1
09-06-2023 11:07 AM