searched the thread but no clear answer....

I have a 2003 brembo brake system, recently changed brakes to stoptech rotors and oem pads.....

i think after installing the pads it started squealing?

Is project mu b-force the best to stop the squealing or ??

thanks!

 

OEM Pads are dusty and noisy...

B-Force are aggressive pads, will still dust and be noisy...

Hawk HPS are a more Quieter pad compound and less brake dust...

 

thanks for the info, i've seen a couple of threads saying they had hawks and they were squealing.....

 

yep, I have Hawks all around but only my front passenger ones squeak a little bit.

 

Did you use enough brake grease in between the pad and shim, and on the back of the shim? The service manual also calls for a bit of grease on the edges of the pads as well.

 

I used more than enough grease. I actually took out the passenger ones last week and put on a diff. brake grease on it and it's better but it still squeaks every now and then.
I'm also using 2 shims on each pad, the oem one and the one that came with the Hawk pads...not too sure if it's a bad thing but there's enough grease on them. The driver's side doesn't squeak @ all.

 

make sure they remembered to put your shims on...