Lost washer down in engine bay...help
Lost washer down in engine bay...help
Hey everyone, couple of questions:
I was doing a little bit of cleaning under the hood and had removed the engine cover.
When I tried to put it back, I guess I misaligned it and one of the metal washers that are attached underneath it, fell down into the engine bay.
My questions are:
1. Assuming it's laying down on the bottom of the engine bay (the under-carriage plastic), how difficult it would be to remove that cover ? I saw 15 nuts and plastic clips or so....
2. Assuming the washer is no longer there (slipped out somehow), does anyone know how much a new Engine cover for a G coupe runs for ? (I doubt they sell these washers separately).
Thanks guys.
2004 G35C 6MT DG/Gr/Prem/NAV/A.Pedals/C.Corners/Polk TW/C.Bra/PIAA/Grnd.Kit/Rebadged [img]/w3timages/icons/cool.gif[/img]
I was doing a little bit of cleaning under the hood and had removed the engine cover.
When I tried to put it back, I guess I misaligned it and one of the metal washers that are attached underneath it, fell down into the engine bay.
My questions are:
1. Assuming it's laying down on the bottom of the engine bay (the under-carriage plastic), how difficult it would be to remove that cover ? I saw 15 nuts and plastic clips or so....
2. Assuming the washer is no longer there (slipped out somehow), does anyone know how much a new Engine cover for a G coupe runs for ? (I doubt they sell these washers separately).
Thanks guys.
2004 G35C 6MT DG/Gr/Prem/NAV/A.Pedals/C.Corners/Polk TW/C.Bra/PIAA/Grnd.Kit/Rebadged [img]/w3timages/icons/cool.gif[/img]
Re: Lost washer down in engine bay...help
I don't think its too hard to remove that cover...its done during the oil and filter service....
When I changed out my fogs the other day I dropped one of the black plastic clips and it fell into the pan.....I was able to retrieve it with out taking it down though..
I'm sure you could fish around in there with a magnet wand..its a pointer with a magnet on the end, maybe if you fish around in there you'll get lucky
other wise just use a similar washer...if its only holding the plastic cover on I'm sure it wouldn't matter that much...anyways Lots of luck! <font color=blue>2old4this</font color=blue>

04 cpe IP/willow/5at/prem/18's/JDM clear corners/Piaa's/MTEC H4 Super White fog/highs
When I changed out my fogs the other day I dropped one of the black plastic clips and it fell into the pan.....I was able to retrieve it with out taking it down though..
I'm sure you could fish around in there with a magnet wand..its a pointer with a magnet on the end, maybe if you fish around in there you'll get lucky
other wise just use a similar washer...if its only holding the plastic cover on I'm sure it wouldn't matter that much...anyways Lots of luck! <font color=blue>2old4this</font color=blue>

04 cpe IP/willow/5at/prem/18's/JDM clear corners/Piaa's/MTEC H4 Super White fog/highs
Re: Lost washer down in engine bay...help
can't say you won't get any help on this forum..heh heh [img]/w3timages/icons/wink.gif[/img]
<font color=blue>2old4this</font color=blue>

04 cpe IP/willow/5at/prem/18's/JDM clear corners/Piaa's/MTEC H4 Super White fog/highs
<font color=blue>2old4this</font color=blue>

04 cpe IP/willow/5at/prem/18's/JDM clear corners/Piaa's/MTEC H4 Super White fog/highs
Re: Lost washer down in engine bay...help
How about great minds think a like?
2004 Infiniti G35C-6MT
LR | Willow | Premium | Aero | Splash | BSM
30% Lumar Tint | Invinca Shield (C-Bra)
Z-Tube | JWT Pop Charger
RT Cats & JIC Y-Pipe(on order)
2004 Infiniti G35C-6MT
LR | Willow | Premium | Aero | Splash | BSM
30% Lumar Tint | Invinca Shield (C-Bra)
Z-Tube | JWT Pop Charger
RT Cats & JIC Y-Pipe(on order)
Re: Lost washer down in engine bay...help
Yea I can't imagine a washer that you couldn't find a replacement for, if that's all it is. I haven't seen it, so I can't say for sure, but it seems that if it's just a washer, just find some others to put on there, even if you have to put a few. A washer is a washer. Unless, like I said, it's some kind of special part.
2003.5 G35 Coupe 6MT Black/Willow
- Texas Tech Mechanical Engineering -
- Texas Tech Advanced Vehicle Engineering -
2003.5 G35 Coupe 6MT Black/Willow
- Texas Tech Mechanical Engineering -
- Texas Tech Advanced Vehicle Engineering -
Re: Lost washer down in engine bay...help
Drive really fast and then brake and turn really hard. That will expel all debris..
Trending Topics
Re: Lost washer down in engine bay...help
<blockquote><font class="small">In reply to:</font><hr>
Yea I can't imagine a washer that you couldn't find a replacement for, if that's all it is. I haven't seen it, so I can't say for sure, but it seems that if it's just a washer, just find some others to put on there, even if you have to put a few. A washer is a washer. Unless, like I said, it's some kind of special part.
<hr></blockquote>
Here is what I'm talking about. First picture is the stock T-washer. The second picture is the closest match I found at the local hardware store, but it still doesn't match, it's too thick which makes it too high, and so the bolt does not reach the screwing groove. I'll try HomeDepot tonight. I don't feel like spending $117 + tax for a new engine cover just because of a missing washer.....
Stock T-Washer

Hardware store T-Washer

2004 G35C 6MT DG/Gr/Prem/NAV/A.Pedals/C.Corners/Polk TW/C.Bra/PIAA/Grnd.Kit/Rebadged/JWT Pop-Charger/Z-Tube [img]/w3timages/icons/cool.gif[/img]
Yea I can't imagine a washer that you couldn't find a replacement for, if that's all it is. I haven't seen it, so I can't say for sure, but it seems that if it's just a washer, just find some others to put on there, even if you have to put a few. A washer is a washer. Unless, like I said, it's some kind of special part.
<hr></blockquote>
Here is what I'm talking about. First picture is the stock T-washer. The second picture is the closest match I found at the local hardware store, but it still doesn't match, it's too thick which makes it too high, and so the bolt does not reach the screwing groove. I'll try HomeDepot tonight. I don't feel like spending $117 + tax for a new engine cover just because of a missing washer.....
Stock T-Washer

Hardware store T-Washer

2004 G35C 6MT DG/Gr/Prem/NAV/A.Pedals/C.Corners/Polk TW/C.Bra/PIAA/Grnd.Kit/Rebadged/JWT Pop-Charger/Z-Tube [img]/w3timages/icons/cool.gif[/img]
Re: Lost washer down in engine bay...help
<blockquote><font class="small">In reply to:</font><hr>
Drive really fast and then brake and turn really hard. That will expel all debris..
<hr></blockquote>
Already tried that - didn't work. I don't think it's even there anymore. I was late to work and had to drive the car, so it probably fell out when I drove off.
2004 G35C 6MT DG/Gr/Prem/NAV/A.Pedals/C.Corners/Polk TW/C.Bra/PIAA/Grnd.Kit/Rebadged/JWT Pop-Charger/Z-Tube [img]/w3timages/icons/cool.gif[/img]
Drive really fast and then brake and turn really hard. That will expel all debris..
<hr></blockquote>
Already tried that - didn't work. I don't think it's even there anymore. I was late to work and had to drive the car, so it probably fell out when I drove off.
2004 G35C 6MT DG/Gr/Prem/NAV/A.Pedals/C.Corners/Polk TW/C.Bra/PIAA/Grnd.Kit/Rebadged/JWT Pop-Charger/Z-Tube [img]/w3timages/icons/cool.gif[/img]
Re: Lost washer down in engine bay...help
Speedaholic, I'm sure your local Infiniti service department has many on these laying around, try asking them.
2004 Ivory/Willow Auto Coupe, NAV, Premium, Performance, Aero Kit with Spoiler 4-piece.
RIP babygirl

2004 Ivory/Willow Auto Coupe, NAV, Premium, Performance, Aero Kit with Spoiler 4-piece.
RIP babygirl

Re: Lost washer down in engine bay...help
they sell telescoping magnets at the auto parts store. Cost $2-$4. Retracts to the size of a pen and extends to about 3 ft.
G35 Coupe, IP, 6MT, prem
G35 Coupe, IP, 6MT, prem
Thread
Thread Starter
Forum
Replies
Last Post
magnetism80
G35 Coupe V35 2003 - 07
5
Feb 1, 2019 10:00 AM




