Its 100% stock, I was very amazed at the #'s I saw. Its a 2003 with 9700 miles. Myfurst pull was 251whp and I backed it up with 250whp. I will post my dyno sheet as soon as I can scan it.

2003 G35C 6-speed
<P ID="edit"><FONT class="small"><EM>Edited by SICKG35COUPE on 04/02/04 09:54 AM.</EM></FONT></P>

 

The numbers are a little too amazing. Is it SAE corrected numbers? Dynojet?

 

I agree... that seems a bit high. That's only an 11% loss. Typically on our cars its around 15-20%.

2004 G35 Coupe Prem / Aero D. Plat/D. Graph

 

Regardless of what the dyno says, use it as your base and then again after you mod to see if it helps.

If you really do have a "Super G" take it to the drag strip and tell us what you run.

btw, my base was 236.7 and I'm now at 252.2 sae corrected on the dynojet.

best 1/4 mi. - 14.033 at 99.74 mph 60ft - 2.092

 

Regardless of what the dyno says, use it as your base and then again after you mod to see if it helps.

If you really do have a "Super G" take it to the drag strip and tell us what you run.

btw, my base was 236.7 and I'm now at 252.2 sae corrected on the dynojet.

best 1/4 mi. - 14.033 at 99.74 mph 60ft - 2.092

 

Chops,
252 is very stout. I looked for your ride in our Rides and not there.
Could you list your mods for me please. I'd like to compare to mine.
TNX

<font color=red>GSM</font color=red>
<font color=red>GSM</font color=red>
<font color=black>Silverstone Coupe</font color=black>

 

this was on a MD mustang dyno, my best and only 1/4 run to date is a 14.3@100.98 with a 2.23 60ft

 

Like I stated before , this car is completely stock.

 

I think this is it?

03 G35C/6MT/DG/G/PREM Stillen Exhaust, Stillen Air Box, 350Z Tube, Crawford Plenum, Eibach Pro Kit, 19" BBS RG-R Wheels, Stark 30 Huper Optik, Random Technology Hi Flo Cats, Mobile One Synthetic, Impul Rear Spoiler, rebadged in Black Chrome.

 

I think this is it?

03 G35C/6MT/DG/G/PREM Stillen Exhaust, Stillen Air Box, 350Z Tube, Crawford Plenum, Eibach Pro Kit, 19" BBS RG-R Wheels, Stark 30 Huper Optik, Random Technology Hi Flo Cats, Mobile One Synthetic, Impul Rear Spoiler, rebadged in Black Chrome.

 

I thought that you got really low numbers on a Mustang dyno, that it is more like real world conditions, or is it the other way around?



220544-chopper.jpg

 

I thought that you got really low numbers on a Mustang dyno, that it is more like real world conditions, or is it the other way around?



220544-chopper.jpg

 

mustang dynos are floor-mounted drums, that have a load control (simulation of real world drag and load)...

these ###'s typ. will come in about 15% lower than the DJ non-inertia dynos.....

when i get me G next week (or two) i will do a baseline (before the vortech goes on) and then a post tune run (after vortech, exh. crawdaddy, and tuning)

sorry for the ramble; im jus a bit excited......