Question concerning my SF Winnings ...

Subscribe
Apr 14, 2008 | 08:51 AM
  #1  
Thinking of a roadtrip and crossed my mind that factory supplied lug wrench will not fit my Volk SF Winnings. Best buy a socket and carry with.
Anyone remember size i need and assume with tight fit it's a "deepwell" type.
Note to G community; You might think about this ,too!!
Thanks!
Reply 0
Apr 14, 2008 | 09:37 AM
  #2  
I don't understand. How did you get your current lug nuts on if you didn't have some way of accessing them????
Reply 0
Apr 14, 2008 | 10:01 AM
  #3  
Quote: I don't understand. How did you get your current lug nuts on if you didn't have some way of accessing them????
My tires were mounted and balanced elswhere. Do you have your own tire machine and balancer?!
Reply 0
Apr 14, 2008 | 10:30 AM
  #4  
Go to SEARS and get yourself a 1/2" Breaker bar. Then match a thin wall deep socket that will fit your lugs...

You can find 1/2" thin wall deep sockets for your lugs on Tire Rack. They are either a 17mm or 21 mm if I'm not mistaken.

Bigguy2000 Check this out at Tire Rack
Reply 0
Apr 14, 2008 | 10:50 AM
  #5  
Quote: Go to SEARS and get yourself a 1/2" Breaker bar. Then match a thin wall deep socket that will fit your lugs...

You can find 1/2" thin wall deep sockets for your lugs on Tire Rack. They are either a 17mm or 21 mm if I'm not mistaken.

Bigguy2000 Check this out at Tire Rack
GR8TG35 ...... Nice find. Will be placing my order when I determine proper lugnut size. Thanks for your assistance!
Reply 0
Apr 14, 2008 | 10:54 AM
  #6  
Don't 4get a Torque Wrench
Reply 0
Apr 14, 2008 | 10:57 AM
  #7  
Get the Extendable Power Wrench Set 1334 from Tirerack and you should be set. Worked for me on OEM lugs. The 3" extension helps too on deep wheels. I'd get some after market lugs and locks though just to deter the causal thieves. $80 for a decent set of lugs/locks may save you a lot of headache. Just a thought.
Reply 0
Subscribe