I hear a click as I start driving. It is only one click, then again when I slow down or speed up. It sounds like its coming from the right side, possibly the suspension. The sound doesn't occur when a go over any bumps. Any ideas what this could be? The car drives normally and the sound was probably like that for a while i just noticed this recently while driving with the windows down. Any info would be appreciated.

 

Sounds like your axle bolts are loose in the rear. Have them tightened at the dealer. Under warrenty too.

- Don't argue with idiots. They will bring you down to their level and beat you with experience.=P-

 

I have the same clicking noise outside of my car which i noticed when the windows were down. I will get it checked out on my oil change service

 

Thanks. I just made an appointment with the dealer. They couldn't give me an appointment until next wednesday. Is it okay to drive it the way it is?

 

dealer fixed mine with no problems. I was hearing the noise from the right side but they took care of both sides at the same time.

And I was hearing the noise for about a week before I was able to bring it in.

2003 G35 Coupe 6MT/Black/Graphite/15% tint/6 wire GroundingGear™

 

So what was exactly causing the clicking noise?

 

I was told it was the spline on the axle that wasn't seated properly. So they regreased the axle and retorqued it.

2003 G35 Coupe 6MT/Black/Graphite/15% tint/6 wire GroundingGear™

 

I had the same noice its nothing major its from the rear axles they just need to regrease them youll be fine

03 6MT Coupe Blk/Blk> Injen CAI, Hotchkis adj Sway Bars, Test Pipes< "Nt G R8D" Aj

 

I had a problem with clunking sounds coming from the front right of the car on slow left turns. After spending 4 hrs. at the dealership it turns out that they didn't torque my wheels properly when they swapped back my summer tires. Once they re-torqued it it was good to go, no problems. So, if the dealer cannot find anything else, ask them to re-torque the wheels, can save you some time !

======
G35C 6MT

 

It's probably your reverberating toggle swindle. I torqued mine down the 75 lbs and it didn't come back. Make sure you torque counter-clockwise!

2 G or NOT 2 G, there is no question!

Injen SES, Kinetix cats, K&N Typhoon, 19" PIAA Super Rozza's (19x9 & 19x10)