I just purchased some oem 2006 g35 seats(power, heated, airbags) and the company i bought it from cut the harness to get it out. I have searched the G service manual for hours but came to the conclusion that with no molex connector on the end its impossible to know which wire is which.

I was just wondering if anybody on here that had a set of oem seats lying around could take a picture of the harness up close so i get my bearing on which wire went to which pin so i can wire these seats into my 350z by matching it by colour.

If i cant come up with anything i will have to tear the harness out of the seats and start from scratch, not gonna be fun either. Basically what im wanting to is just get the seats to move forwards, backwards, and recline, the heated function and airbags are expendable. Thanks in advance for any help guys if you need my email address to send pic pm for email.

 

you need a wiring diagram. a picture will be tough to use.

just know that when nissan says "L" it means blue. "L/Y" is blue wire with a yellow stripe.

pretty sure all the rest of the colors are straight forward.

 

a wiring diagram would work too, i couldn't find one though that listed each color
only certain wires were described by color. Thanks for the info on L=blue, that will come in handy.