Will a set of 25 & 30 mm V2 spacers fit without rubbing on a G35 coupe? It's stock height, but I'm looking to lower it about an inch come spring.
Thanks guys.

 

Depends on what the offsets of your wheels are to begin with.

 

yes. Will work with both the OEM 18's and 19's. Don't know about aftermarket wheels.

^^^Like previously stated, depends on the offsets.

 

I just installed 20mm spacers on my 35mm offset wheels and the rears scrub. Matter of fact they are eating through my side wall. I gotta roll my fenders NOW

 

im running 25/30mm spacers on oems and dropped an inch.

oem height no rub
dropped - roll your fenders

 

lots of dirrent variables... offest, wheel width, tire size, camber.


If its OEM 18s or 19's with OEM spec sized tires.. your should not rub without a drop. I doubt you'll rub if its only a 1" drop you're getting.

 

Hey what offsets are on the OEM 19's? Do you know what are good tire sizes to go with them?

 

+30 Front, +33 Rear

If you are looking for specific information, you'd better put some effort into it on your own or you're going to get . Remember search is your friend and will earn you respect from us as opposed to being the lazy azz that wants to be spoon fed.

That being said, I'll be nice today and help you out. Read through this thread and please, never ask this question again. Also it's not cool to jack other people's threads for your personal gain. Look around and if you don't find the knowledge you seek start your own thread, just make sure it isn't something stupid like "What's the best intake for our cars". Thank you.

https://g35driver.com/forums/wheels-...end+all+thread