About to get my Philips 6000k Untinon bulbs...
considering about which one should i get....D2s or D2R....

Any opinions?? thanks

For our headlights we need the D2R lamps. The "R" is for "Reflector Type" and the "S" is for "Projector Type." If you get aftermarket bulbs, they are machined to fit D2S and D2R housings. The 6000K bulbs I have fit perfectly in my G35 and fit perfectly in my mother's ML projector xenons. They aren't the Phillips 6000K, they are another type.

Hope that helps.

-Chris

You can make a D2S work in the stock housing with a slight modification to the base of the bulb. The D2S will provide a little more output as they don't have the ceramic coating on them. However, you'll loose the 'sharp' (I use that term lightly) cutoff that the 2R's will give and you'll have to aim them down a little further. They'll have more of a halogen type cutoff and beam pattern.

I want to get the same bulbs as you, in D2r for my low beams. the philips 6000k D2R.

however, i couldn't find them. where are you getting yours from? thanks.

im getting in a local auto shop.

I know ebay has them =)
just type in philips 6000k D2R and u'll find them

i did, there was only 1 seller, and hes from taiwan selling "german made philips 6000k D2R bulbs" for $275ish a pair. not worth the price or the worry that it'll be some BS bulbs from taiwan with philips written on it.

Did you try <a href="http://www.suvlights.com" target="_blank">suvlights.com</a>?

John