ABS/SLIP/VDC Lights on after SPC kit - Page 3 - G35Driver

Jan 22, 2011 | 01:28 AM

#31

RedHot6mt

Registered User

iTrader: (3)

Joined: Jun 2010

Posts: 331

Likes: 35

Quote:

Originally Posted by herrschaft

If you remove the shims, then yes you should be able to get the car back within spec.

What year is your car? Not saying that this is a fact but I've concluded that the newer models (05/06+) don't have as much camber issues as the first gens.

I have and early 2003 Coupe:

Apr 4, 2015 | 04:16 PM

#32

SuperGTR

Registered User

Joined: Apr 2015

Posts: 1

Likes: 0

Spc front camber kit abs/slip/vdc off lightts on after installation

I know this is an old thread but i was able to FIX this problem.
After I installed the SPC kit with the spacer and ABS relocation the car started to make this weird spring sound coming from the front left of the car and the SLIP light would come on 3 times.

I learned that the air gap between the ABS sensor and the wheel hub was off.
So i added 2 washer/shims to the screw securing the sensor and the problem was still there.
I ended up removing all shims and the braket that came with the kit and installing the sensor as it was installed before (just a screw with a washer and the sensor) But i put it on top of the new screw that was provided when i did that on both sides all the lights were still on so i drove around for 10 sexonds and they all went off havent had a problem since.