Help window stuck down!!!
#1
Help window stuck down!!!
So rightnow on my way home my window decided to take a s*** on me while rolled halfway down. I already know its a common problem on the G. My question is, is there anyone that knows how to get the window back up for now untill I get the motor replaced? Ps. ITS STARTING TO RAIN!
2004 coupe
![Icon43](https://g35driver.com/forums/images/smilies/icon43.gif)
#2
Don't suggest this as an everyday thing but there is a little sweet spot where you give a little bang with the bottom of you hand.
It is towards the middle of the armrest. Worked for me when i had to get my window up a while back.
EDIT: I dont know if this works on the passenger side but i know it will work after a little try on the drivers
It is towards the middle of the armrest. Worked for me when i had to get my window up a while back.
EDIT: I dont know if this works on the passenger side but i know it will work after a little try on the drivers
#4
You could try taking the panel off on the inside and try tinkering with it yourself. Alot of the time the motor isn't really broken.. the connection might be loose or something. So if I were you.. i'd just mess around with it and clean it out before buying a new motor.. because those aren't cheap haha. Well unless you get one at a junkyard.
Either that or you can probably crank it by hand once you take the panel off.
Either that or you can probably crank it by hand once you take the panel off.
#7
Trending Topics
#8
#9
This thread has pretty detailed info on brush replacement.
http://my350z.com/forum/maintenance-...e-fixed-2.html
You might just need to take the motor apart and give it a good cleaning. Page 2 on the link above has pictures of the motor apart.
http://my350z.com/forum/maintenance-...e-fixed-2.html
You might just need to take the motor apart and give it a good cleaning. Page 2 on the link above has pictures of the motor apart.
The following users liked this post:
Freaky510 (04-26-2018)
#10
#11
When mine went out, I used to hold the window switch up or down (whichever way I wanted the window to go) and shut the door at the same time (hard). That only worked for about a week or so until it completely died.
This link is a video of how to replace your window motor.
http://infinitihelp.com/diy/gcoupe/p..._procedure.htm
Here's a DIY write-up.
https://g35driver.com/forums/body-in...emoval-20.html
This link is a video of how to replace your window motor.
http://infinitihelp.com/diy/gcoupe/p..._procedure.htm
Here's a DIY write-up.
https://g35driver.com/forums/body-in...emoval-20.html
#12
#14
All of you that it worked probably had a chunk of dirt in it and just needed to be cleaned. The seals are not the best and they get dirt and corrode. A good cleaning will usually do the trick. If not theres a kit that will rebuild the part that you actually need to replace not the whole motor.