Ok so I got it out and switched parts over and pulled the oil pan this is what I found parts of a rod and a piston

 

Looks like the drain plug magnet was doing it's job

 

So looks like by then end of next week she will be running. Only 3 months of being down

 

Dude seriously? Do you know how weak and porous those blocks are? Those things will crumple like a sand castle if they get a crack in them. All it would take is hitting it with a wrench by accident and those things will explode with that much weight on them. Dont be a cheap *** and get some jack stands, even cheap $40 ones are 100x better than a cinder block.

On a side note Im interested in seeing how this build turns out.

 

Dude I'm way pass that the blocks were used for 1 day and now I got jack stands it work for removing what I needed I got stands now

 

Cool. I just dont want to read about someone on here getting squashed by their car because they cut corners on safety.
My local news covers that enough.
Now back to the car.

 

nice progress

 

Ok so today I got it all together and I took this pic right before I got the trans on and then we put her in by the end of the night so the goal for tomorrow is a start up

 

what type of headers them be hope not Ebay or Top Speed if it be them good luck

 

EBay for sure cost only 100 bucks better then stock and fitment was a little off but not that bad

 

It's alive at 9:00pm runs like a champ but it has a exh leak on the y pipe ill post a video of the start up and the exh sound

 

smitty, if you want some megan headers i got a set im trying to get rid of, ill give them to you for 150... I bought them for 250 and never installed them.

 

congrats!

 

Nice!! I'd like to see the vid. Congrats on the build though

 

Ok so after 2 days of driving it I have discovered the cam phasing solenoid on the drivers side is not working it make the car very slow and no power for passing or getting up to speed im not sure how to go about this problem and advice