Will these wheels fit on our cars ('03-'07 NON-brembo)
Will these wheels fit on our cars ('03-'07 NON-brembo)
My buddy wants to pick up a pair of wheels and has a '03 Coupe, NON-Brembo. The Wheels are 20x9 front, 20x10 rear (which is not a problem). But the offset is +35 front and +45 rear. Will they fit without modification with that front/rear offset? I couldn't answer the question because I've only put one set of aftermarket wheels on my car and they were FOR my car. Volk GT-C.
The +35 and +45 seems kinda high tho. Also, center bore is 73.1mm. Thanks guys!
The +35 and +45 seems kinda high tho. Also, center bore is 73.1mm. Thanks guys!
Last edited by wyldfyer; Jul 3, 2011 at 02:36 AM.
I think they will fit but you want an offset that is closer to +20 or less on a 10 inch wheel in the rear. You will need a spacer to make them fit over the brembos I think.
Its not that they won't fit, its that if they do fit the tire will be pretty far from the fender, its like lowering the car on the stock wheels which are +30 for the 03's. When you lower the car you notice the wheels will looked tucked in which doesn't look right. If he is getting wheels tell him to wait I would hate to see him waste his money and then want another set with lower offsets. Get it right the first time.
Yeah I guess he would have to START OUT modifying it with spacers just to get the look he wanted. As I think more about it, +45 is like a FWD offset.
Trending Topics
I actually think the Fronts are +45 and the rear +35. But since the wheels are 20x9 front and 20x10 rear, they should be ok. If anything else, he is probably looking at a +5 mm offset more than what he may want. Thats nothing that a simple spacer can't fix. I think he gave me the info wrong when he said the rear was +45. That would have been really lame looking, LOL.
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
May 31, 2020 01:26 PM




