They're loose enough to where I can pull em out with a VERY gentle pull, slightly toward the wheel and out and it is out of the bumper. Zip tie mod sounds good for a quick fix, any chance I can get a picture of the clip so I know what to look for? I might just try and make something that works at the low low cost of 25¢ instead of searching for a part # and going to an Infiniti dealership and paying $10 for a couple of clips

 

The clip is on the side marker not on your car. Just buy new ones if there broken. Our marketplace is good for that or even eBay if you make sure to buy the good ones. They may even just be bent and you might could bend them back. Just look at the damned things lol. It would help more for you to show a pic.

 

This will sound silly but someone should post a quick video of the install so everybody knows how to exactly do it first hand!

 

There's honestly no need.

If you can yank your dank, you can swap clear corners.

Pull on the back side (wheel side) of the clear corner until it pops up. Then pull it towards the rear and out to pop the other clip off.

You can pop it off first with a screwdriver if you have problems.

Here's a guide, if you need it. showing how it removes.

https://g35driver.com/forums/body-in...r-corners.html

 

No you do not want Borla, that's the worst excuse for an exhaust system I ever had! (my second of five) Not worth putting on your ride STLG35guy!
Gary

 

Thanks Gary! All stay away. I'm sticking with all NISMO theme. Nismo exhuast ad nismo cold air intake for this summer! Any good websites out there to get good deals on that stuff?

 

try vendors here