Hey everyone. Cleaned my throttle body and combustion chamber today with some Mopar Combustion Chamber Cleaner. Everything went fine only now the car is somewhat revving by itself after I let off the gas and depress the clutch (as in when shifting between gears). Its also idling at about 1100rpm. I did an "Infiniti G35 Coupe Accelerator Pedal Released Position Learning", a "Infiniti G35 Coupe Throttle Valve Closed Position Learning", and also an "ECU reset procedure".

I thought I did the "Infiniti G35 Coupe Idle Air Volume Learning Procedure" but I guess it was done incorrectly.. Anyone have any experience with the same issues as me and a possible fix just incase the Idle Air Volume Learning Procedure doesnt work when I attempt it again tomorrow..???

As always all help appreciated !

 

Problem solved. Did an Idle Air Volume Learning Procedure and also had a small vaccume leak where the top half of the plenum meets the lower plenum.