Dynod my 03 Vortech G- Fi experts please chime in
#1
Dynod my 03 Vortech G- Fi experts please chime in
so last sat a group of us here in town got together to do a dyno runs on our Gs.
My mosd are V2 vortech kit with stock headers, cats and exhaust..
i was expecting a lil more but i guess that not bad cosiderning its prob on low boost..
first run was done in 3rd gear and 2nd run was done in 4th gear. temp was around 90 degrees in the shop.
are these normal numbers for an 03coupe with my mods?
My mosd are V2 vortech kit with stock headers, cats and exhaust..
i was expecting a lil more but i guess that not bad cosiderning its prob on low boost..
first run was done in 3rd gear and 2nd run was done in 4th gear. temp was around 90 degrees in the shop.
are these normal numbers for an 03coupe with my mods?
![](http://img254.imageshack.us/img254/1774/gdyno62312.jpg)
#6
im saving up for a MD TDX2 and art pipes... but thanx for the offer though.
heres the thing. i purchased the vehicle already with the Vortech Kit on it and the previous owner was not a car guy, he just got the car as part payment for a business deal. Ive always been into modding my own cars i come from owning a 3rd gen altima with the VQ35 that i had pretty much every bolt on and suspension mod availble for and it was all done by me.
however, when i ran into this G it was a great deal and i could tell it had been well kept, paint and interior are in excellent shape.
anywho, im not sure what pulley its runing but i assume its the one that comes with the kit.
the dyno shows the car is runing a lil lean so im planing on taking the car to Rob from Zcar Garage in the new few weeks so he can check it out and let me know what was done to the car and wat needs to be done as far a fuel upgrades and other supporting mods.
however, when i ran into this G it was a great deal and i could tell it had been well kept, paint and interior are in excellent shape.
anywho, im not sure what pulley its runing but i assume its the one that comes with the kit.
the dyno shows the car is runing a lil lean so im planing on taking the car to Rob from Zcar Garage in the new few weeks so he can check it out and let me know what was done to the car and wat needs to be done as far a fuel upgrades and other supporting mods.
#7
Trending Topics
#9
#10
Registered User
iTrader: (25)
anywho, im not sure what pulley its runing but i assume its the one that comes with the kit. the dyno shows the car is runing a lil lean so im planing on taking the car to Rob from Zcar Garage in the new few weeks so he can check it out and let me know what was done to the car and wat needs to be done as far a fuel upgrades and other supporting mods.
#11
I hope you get your supporting mods very soon. I never seen a G that is running FI below 300. When you get all those supporting mods on, i say you go to Church automotive and get a tune. They do awesome work over there. Soon i will be getting a tune but i still wish i was FI.
Already saving up for the md Tdx2 and art pipes
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
#13
You might be on a complete (non-tuner) kit with a stock 3.33 pulley. Since you already purchased the injectors and fuel pump all you need is the Uprev software and a tune from ZCG. You are in good hands with Rob. He does amazing work! The Art pipes and the MD exhaust will be the icing on the cake.
I would drop to a 3.12 pulley though. I think I have one, let me know if you need it. Goodluck
I would drop to a 3.12 pulley though. I think I have one, let me know if you need it. Goodluck
Last edited by unvmyg; 06-29-2012 at 12:00 PM.
#14
Registered User
iTrader: (16)
Like others said, if you make sure that you have the 3.12 pulley, injectors and fuel pump, and some sort of less rescricting exhaust (anything aftermarket pretty much) and either tps/HFCs/arts, your tuner should get you anywhere between 360-420, depending on how conservative you want it.
Also make sure that they check for boost leaks, you might consider upgrading to silicone couplers and t bolt clamps to avoid that issue in the future
Also make sure that they check for boost leaks, you might consider upgrading to silicone couplers and t bolt clamps to avoid that issue in the future
#15
Registered User
iTrader: (10)
numbers look very low and looks very lean if thats the tru a/f ratio..
are u on stock 3.33 pulley? i put down 350whp on the stock pulley and 420whp on the 3.12 after being tuned with a few other exhaust mods and such..nothing major
ur a/f should be mid to high 11's max..i wouldnt rip on it with it being that lean
are u on stock 3.33 pulley? i put down 350whp on the stock pulley and 420whp on the 3.12 after being tuned with a few other exhaust mods and such..nothing major
ur a/f should be mid to high 11's max..i wouldnt rip on it with it being that lean