I have a couple question that I was hoping I can get some answers to so I'll just put them in one thread.

1. I'm having a little issue with my passenger seat in my coupe. When I need to access the back I pull the little lever on the side of the seat the back comes forward and I press the button to start the seat sliding forward. That works all great.

When its time for me to press the button again to slide the seat back to its original position it goes back, but stops a couple inches before the max that the seat can be positioned back, even though I originally had the seat maxed out. I hope I was clear enough lol.

2. When I open my drivers side door the window doesn't slide down that little bit that it always does. It seems to me that the track slides down because I can push the window down by hand and it will move to the lower position, and when I close the door it will slide back up automatically.

Any help with these issues would be greatly appreciated!
Thanks!

 

Anyone?

 

1- The seat stops a couple inches before the max: NORMAL. Nissan made that way so that the seat doesn't crush the person who just sat in the back's feet. It is mentioned in the manual.

2- I suggest you reset the window motor (didn't work for me though). My window goes down that inch but doesn't go up, i have to pull it manually.. The window motor has issues on our cars. I'm waiting for it to die completed to order a new one.

 

Thank you for your help!