Hi guys,

I'm going to be installing my front lip today, and I am curious if I just use the two jackpoints at the front that I normally use to swap out wheels... or if there are better points (maybe towards the front of the car) that are safe and more suitable for the front lip installation?

Thanks

 

You can actually just use a ramp if you have one. -or- the same jack points you
indicated. Make sure you use an adapter if you're going to put the car on jack
stands as the rail along the side of the car will eventually break if you set
the car on it. And use wheel chocks.

 

Look in the owner's manual - there is a section illustrating the two jacking points for the floor jack.