Coupe Random Little Question Thread
Former G35driver Vendor
iTrader: (12)
+1 for refusing caliper covers. I wince every time I see them.
I'd go with the Akebono's if you can swing it. Send Z1Motorsports a PM, they should be able to get you taken care of
Thanks!
Nick C.
I'd go with the Akebono's if you can swing it. Send Z1Motorsports a PM, they should be able to get you taken care of
Thanks!
Nick C.
The brake calipers on my car currently look exactly like this, both front and rear.
http://www.allnissaninfinitiparts.co...or-caliper.jpg
It looks unfinished and that bugs me.
I've read a few posts on here about getting G37 sport brakes? I assume they mean these?
http://www.nissanraceshop.com/image/...1001-jl02a.jpg
Would this G37 brake setup fit on my 03 G35 coupe? If this doesn't work, could I get some suggestions thrown my way?
Also, I refuse to put any kind of fake plastic/metal whatever cover, or paint onto my G, so please don't suggest them.
Thanks!
http://www.allnissaninfinitiparts.co...or-caliper.jpg
It looks unfinished and that bugs me.
I've read a few posts on here about getting G37 sport brakes? I assume they mean these?
http://www.nissanraceshop.com/image/...1001-jl02a.jpg
Would this G37 brake setup fit on my 03 G35 coupe? If this doesn't work, could I get some suggestions thrown my way?
Also, I refuse to put any kind of fake plastic/metal whatever cover, or paint onto my G, so please don't suggest them.
Thanks!
Registered User
Joined: Feb 2007
Posts: 795
Likes: 6
From: St. Louis
Need help with the market place
I don't know who to talk to or where to go. But I can't post in the market place.
It says I need a handwritten signature and date in the picture which I have provided. I tried multiple times with multiple different pictures and it still won't let me to that reason only.
It says I need a handwritten signature and date in the picture which I have provided. I tried multiple times with multiple different pictures and it still won't let me to that reason only.
Been here since '07 and have enough posts, shouldn't be restricted!
If you're trying to sell anything on our Marketplace you do need to post a pic of what you're selling which needs to include a written note with your name on it. Include those two things and you'll be able to post on the Marketplace! 
Gary
Gary
Registered User
Joined: Feb 2007
Posts: 795
Likes: 6
From: St. Louis
I'm using these pictures, The signed paper pic was like my 4th or 5th take. That is the best pic I can take without distance blurring out my handwritten note.
I found the problem. The red font on the right side is just a note that says you need a hand written paper. I treated as a requirement that i didn't fulfill to post.
Thank yall for helping though.
I found the problem. The red font on the right side is just a note that says you need a hand written paper. I treated as a requirement that i didn't fulfill to post.
Thank yall for helping though.
Last edited by Gee3point5Mhmm; Apr 8, 2014 at 07:22 PM.
Registered User
Joined: Jan 2014
Posts: 8
Likes: 0
Hey guys, quick question regarding The OEM 19's and lug nuts. Which style of lugs can I use safely? I had the OEM lugs on the car before, and a friend have me a set of extended "tuner" lugs for free. They have the conical style seat, and it appears my oem ones are the ball style. Which should I use? Are one or the other unsafe with these wheels?
OEM are not ball style lug nuts, they're conical. Typically tuner lug nuts don't fit OEM wheels anyway. Most of the time the seats are too skinny to properly engage OEM wheels. You can try though.
^^^^lawlz
On a level ground, measure the height of the wheel arches at the highest point (center of the wheel), compare that to values found in FSM below.
On a level ground, measure the height of the wheel arches at the highest point (center of the wheel), compare that to values found in FSM below.
Last edited by LoSt180; Apr 10, 2014 at 05:58 AM. Reason: added fsm info
Any of you fools know the biggest spacer I can use without extending the lugs?
I have the 20mm/front 25mm/rear setup but I want them pushed out just a bit more. My buddy has some 5mm and 8mm spacers he took off his MS3. So, I'm thinkin I'll put his behind my Ichiba V2s, but will the lug be long enough to secure the V2 spacer with the 5 or 8mm spacer behind it?
Also, would that mess with the hubcentric-ness of the ichibas?
I have the 20mm/front 25mm/rear setup but I want them pushed out just a bit more. My buddy has some 5mm and 8mm spacers he took off his MS3. So, I'm thinkin I'll put his behind my Ichiba V2s, but will the lug be long enough to secure the V2 spacer with the 5 or 8mm spacer behind it?
Also, would that mess with the hubcentric-ness of the ichibas?
Yeah, I know. I just saw his hangin there and was thinkin..
