G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

G35 wont start or crank, weird beeping noise. Video.

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 16, 2015 | 06:47 AM
  #1  
Alex Ant's Avatar
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 5
Likes: 0
G35 wont start or crank, weird beeping noise. Video.


I have no engine mods.
 
Reply
Old Apr 16, 2015 | 06:54 AM
  #2  
Alex Ant's Avatar
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 5
Likes: 0
i forgot to add the headlights are not on either.
 
Reply
Old Apr 16, 2015 | 11:47 AM
  #3  
Spartan268's Avatar
Registered User
Joined: Jul 2014
Posts: 508
Likes: 45
From: Vancouver, BC
Originally Posted by Alex Ant
i forgot to add the headlights are not on either.
Only time I ever heard that was when the courtesy light or lowbeam are left on upon trying to leave the car.

Try unplugging the battery for a bit, press brake for like 3 seconds, then hook it back up?
 
Reply
Old Apr 17, 2015 | 01:54 PM
  #4  
Alex Ant's Avatar
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 5
Likes: 0
Solved the problem and somehow i have the SES light now again. How i solved it was by finding a fuse box that i didn't know existed that was behind the battery. The fuse was a 10A called AT cont, the meter fuse in driver side was also blown. So what i did was I took the spare fuse on the driver side an put in on the 10A AT cont and it worked but my meter fuse did not therefore i didn't have any lights on the dash.


I drove to autozone and when i almost got there my car i lost power and all my lights started going away, then when i got there I put in the new 10A fuse for the meter and the car would not start and seems as if the battery died. It started giving me the codes u1000 u1001 p0113 p0123 p0223 p0462 p1122 p1574. I jumped the battery and the car started fine but ses light is still on. Im confused as to what to do now.
 
Reply
Old Apr 17, 2015 | 06:13 PM
  #5  
upallnight's Avatar
Registered User
Joined: Mar 2015
Posts: 46
Likes: 2
Sounds like you have a bad alternator that is not charging the battery, or you have a battery with a dead cell.
 
Reply
Old Apr 17, 2015 | 11:51 PM
  #6  
coffeysm's Avatar
Registered User
iTrader: (1)
Joined: Jun 2006
Posts: 1,382
Likes: 171
From: West Chester, PA
Originally Posted by Alex Ant
Solved the problem and somehow i have the SES light now again. How i solved it was by finding a fuse box that i didn't know existed that was behind the battery. The fuse was a 10A called AT cont, the meter fuse in driver side was also blown. So what i did was I took the spare fuse on the driver side an put in on the 10A AT cont and it worked but my meter fuse did not therefore i didn't have any lights on the dash.


I drove to autozone and when i almost got there my car i lost power and all my lights started going away, then when i got there I put in the new 10A fuse for the meter and the car would not start and seems as if the battery died. It started giving me the codes u1000 u1001 p0113 p0123 p0223 p0462 p1122 p1574. I jumped the battery and the car started fine but ses light is still on. Im confused as to what to do now.
Those U codes are pretty bad and that "fuse" box behind the battery is actually called the IPDM. Could be your ECU, IPDM, wiring, or something along those lines. I'd check your ground wires first as well, I read somewhere those can cause issues.
 
Reply
Old Apr 18, 2015 | 06:07 AM
  #7  
Alex Ant's Avatar
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 5
Likes: 0
Originally Posted by coffeysm
Those U codes are pretty bad and that "fuse" box behind the battery is actually called the IPDM. Could be your ECU, IPDM, wiring, or something along those lines. I'd check your ground wires first as well, I read somewhere those can cause issues.
Update: Alright guys, from what i read in the last forum post that i saw on G35driver is that people solve the problem and never bother to post it. I think i solved the problem indefinitely after getting the fuse for the AT Cont (behind the battery) and the meter fuse (under the driver side). A friend a mine that knows about electronics told me to reset the ecu by taking the battery out for an hour (i know stupid of me to not try it after the fuses). That made all the SES lights to go off finally and no codes are shown, I've been driving it for half a day and everything is working like normal (no SES). Thank god its nothing more serious but sucks how much time i took trying to figure all of it out since its the only car i have available.


Hopefully no other problems happen related to this, i can't believe a reverse light fuse would cause so much trouble in our cars.
 
Reply
Old Apr 19, 2015 | 12:18 PM
  #8  
Siciliang35's Avatar
Registered User
Joined: Jan 2015
Posts: 331
Likes: 14
Nice. Buy a few extra fuses . The thing is , a fuse wont blow by accident. Something might be loose and caused a short. Can happen again.
 
Reply
Old Apr 19, 2015 | 04:19 PM
  #9  
Alex Ant's Avatar
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 5
Likes: 0
Solved I left the battery unplugged one more time over night and everything is back to normal.
 
Reply
Old Dec 13, 2019 | 10:20 AM
  #10  
Ronny Cerritos's Avatar
Registered User
Joined: Dec 2019
Posts: 1
Likes: 0
wont start but beeps 4 times
Did you replace the fuses & then disconnect the battery? I’m a little confused here, I recently got the same issue and you’re the only hero to post about the solution
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chinee
G35 Sedan V35 2003-06
21
Jun 10, 2024 07:48 PM
netcbc
Exterior - Body Parts CDN
2
Aug 21, 2015 09:50 AM
newg37
G35 Coupe V35 2003 - 07
1
Jul 26, 2015 09:32 AM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM
papo020
G35 Sedan V36 2007- 08
0
Jul 17, 2015 10:30 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:26 PM.