Do you have any interest in performance, or are you just going for an "aggressive" look?

If you don't care about adding weight to what already look like (but may not be) heavy wheels, just add 25-30mm spacers and you should get the "aggressive look" you want.

If you want to do it right (performance AND looks), buy lighter wheels that have the correct offset and skip spacers.

 

30 all around with those specs???????

just do 5 in the rear and 10 in the front for a flush look, 30mm all around will make your car look dumb.

 

Wouldn't that be too small? I'm thinking of 20 front and 25 rear now.

 

if you want a crazy stance look.. then yes, it would be too small. but if you want a flush/static look, then 20 front and 25 is too much, especially with your drop. you're going to need camber arms as well if you go that wide

 

Re read
He said he wants to go pretty aggressive. What you just said to do will leave him still looking like the titanic lol
Not sure if srs

His original specs are Weak as hell for "pretty aggressive"

 

I went even lower this past weekend for the infiniti vs honda meet which sucked because of the rain, I scrape my exhaust over high bumps if I don't get a perfect angle and it sucks still. Im still good on the 20/25 mm right

 

You 100% will need a camber kit if you go 20/25. Your tires will be touching your fender, look how thick 25mm spacers are lol. I would honestly go 10/5 for a flush look. If you want "aggressive" then 25/20 will work but you're gonna have to raise your car or get a camber kit for sure.

 

Pretty aggresive =/= static/flush.

10mm spacers would leave him flush..

 

Op you asked for pretty aggressive
Which is this
10 -16

Not this bs 9.5 +15

 

at the end of the day Your specs are more or less sedan specs when trying to be "pretty aggressive"

Whatever "pretty aggressive" entails and works out to be in your opinion is up to you.

 

Agreed, but 30mm spacers would bring him past that.. plus hes lower than you so it wouldnt work unless like I stated before, he gets camber arms

 

A 30mm up front will bring him to still less than me?


????

19x9.5 -8 effective offset

 

And if you do 30mm in the rear same thing right??
Or....... you do 10mm spacers and have a nice flush look. Like you said, everyone has their view of "aggressive". and with his drop, 30mm spacers wont work alone.

 

should of went with a square set up with 10.5s all around. But do the 30mm up front 20 mm in the rear. that will make your "poke" even all around and it should clear with stock arms you might have to pinch your front fenders flat.

Your specs would be as follows
19x10.5 +2
19x9.5 -8

 

I'm still not quite sure why you're so worried about everything else and are paying no attention to the fact that your trunk is not painted... It's really the most obvious thing that needs to be done before any more money goes to anything else.